FG501: Difference between revisions

Revision as of 06:42, 14 November 2021

Tektronix FG501
function generator Tektronix FG501 Produced from 1972 to 1993 Manuals Tektronix FG501 Manual (PDF, OCR) Tektronix FG501A Manual (PDF) (All manuals in PDF format unless noted otherwise)

The Tektronix FG501 is a function generator plug-in for the TM500 system.

The TRIG OUT signal is available on the front panel via a BSM female connector.

	— FG501 —
Frequency	0.01 Hz to 1 MHz in decade steps
Output	Max. 20 V_p-p into high impedance, 10 V into 50 Ω (SN < B130000: 15/7.5 V)
Offset	Max. ±7.5 V_p-p into high impedance, 5 V into 50 Ω (SN < B130000: 5/2.5 V
	— FG501A —
Frequency	0.002 Hz to 2 MHz in eight decade steps
Output	Max. 30 V_p-p (into high impedance)
Attenuator	60 dB in 20 dB steps, 20 dB variable
Rise time	25 ns
	— All models —
Signals	sine, square, triangle, ramp, pulse
Features	voltage controlled frequency input (1000:1 ratio) triggering variable phase control symmetry variable from 5—95% internal sweep generator, 3 decades, lin/log

@@ Line 33: / Line 33: @@
 * [[FG507]] - same specs as FG501A, added internal sweep generator
 * [http://www.barrytech.com/tektronix/tektm500/tekfg501.html FG501 @ barrytech.com]
-* [https://www.youtube.com/watch?v=B5M0QhbhXR4 Tektronix FG501A Repair and Calibration/Alignment]
+* [https://www.youtube.com/watch?v=B5M0QhbhXR4 Zenwizard Studios - Tektronix FG501A Repair and Calibration/Alignment]
 ==Pictures==