067-1436-00: Difference between revisions
Jump to navigation
Jump to search
Jaredcabot (talk | contribs) (Added software part number) |
Jaredcabot (talk | contribs) (Fixed sidebar) |
||
| Line 1: | Line 1: | ||
{{ | {{Instrument Sidebar | ||
| | |class=Calibration fixture | ||
| | |manufacturer=Tektronix | ||
| | |series=Communication Pod | ||
|model=067-1436-00 | |||
| image=067-1436-0x_1.jpg | |summary=Calibration fixture | ||
| introduced=(?) | |image=067-1436-0x_1.jpg | ||
| discontinued=(?) | |caption=Communication Pod | ||
| designers= | |introduced=(?) | ||
| manuals= | |discontinued=(?) | ||
|designers= | |||
|manuals= | |||
* [[Media:070-8760-02.pdf|Tektronix Communication Pod Instruction Manual 070-8760-02]] | * [[Media:070-8760-02.pdf|Tektronix Communication Pod Instruction Manual 070-8760-02]] | ||
}} | }} | ||
Revision as of 02:20, 4 October 2023
The 067-1436-00 Communications Pod was used between a PC and a TAS400, TDS300 or THS700 series oscilloscopes to download firmware to the instrument. It uses both a serial port and GPIB at the same time along with specific PC software.
The ribbon cable connects directly to the main board on TAS400 and TDS300 series scopes, while THS700 series scopes had an adapter cable to fit to its mainboard.
The green RJ45 connector on top seen in the pictures is not original.
Software
Pictures
-
-
-
-
-
THS700 Adapter Cable
-
THS700 Adapter Cable
