067-1436-00: Difference between revisions
Jaredcabot (talk | contribs) (picture description edit) |
Jaredcabot (talk | contribs) (Added link to TWD120) |
||
| Line 13: | Line 13: | ||
* [[Media:070-8760-02.pdf|Tektronix Communication Pod Instruction Manual 070-8760-02]] | * [[Media:070-8760-02.pdf|Tektronix Communication Pod Instruction Manual 070-8760-02]] | ||
}} | }} | ||
The '''Tektronix 067-1436-00 Communications Pod''' was used between a PC and a [[:Category:TAS series scopes|TAS400]], [[:Category:TDS300 series scopes|TDS300]], or [[THS-series oscilloscopes|THS700]] series oscilloscopes to download firmware to the instrument. It uses both a serial port and GPIB at the same time along with specific PC software. | The '''Tektronix 067-1436-00 Communications Pod''' was used between a PC and a [[:Category:TAS series scopes|TAS400]], [[:Category:TDS300 series scopes|TDS300]], [[TWD120]], or [[THS-series oscilloscopes|THS700]] series oscilloscopes to download firmware to the instrument. It uses both a serial port and GPIB at the same time along with specific PC software. | ||
The ribbon cable connects directly to the CPU board on TAS400 and main board on TDS300 series scopes, while THS700 series scopes used an adapter cable to connect to the socket on its mainboard. | The ribbon cable connects directly to the CPU board on TAS400 and main board on TDS300 series scopes, while THS700 series scopes used an adapter cable to connect to the socket on its mainboard. | ||
Revision as of 06:09, 5 October 2023
The Tektronix 067-1436-00 Communications Pod was used between a PC and a TAS400, TDS300, TWD120, or THS700 series oscilloscopes to download firmware to the instrument. It uses both a serial port and GPIB at the same time along with specific PC software.
The ribbon cable connects directly to the CPU board on TAS400 and main board on TDS300 series scopes, while THS700 series scopes used an adapter cable to connect to the socket on its mainboard.
The Pod uses a Motorola M68332BCCDI 'DIBUG' debug module which contains a M68HC11 MCU and RS-232C serial communications, which is mounted on a Tek designed mainboard.
This module was originally intended for use with the Motorola 'M68332BCC' (Business Card Computer) and was commonly used on the 'M68332EVS' development board.
The green RJ45 connector on top seen in the pictures is not original.
Software
Scope Firmware
- TDS300 Firmwares (ZIP)
- THS700 Firmwares (ZIP)
Pictures
-
-
-
-
-
067-1436-00 Internal
-
067-1436-00 Mainboard underside
-
067-1436-00 Motorola Dev Board Top
-
067-1436-00 Motorola Dev Board Bottom
-
THS700 Adapter Cable
-
THS700 Adapter Cable
