Shutter Actuator Model 2: Difference between revisions

Jump to navigation Jump to search
(Created page with "The Tektronix Shutter Actuator Model 2 is a mains-powered device that provides the power to operate a rotary solenoid for taking a photograph with an oscilloscope camera. The ...")
 
No edit summary
Line 1: Line 1:
The Tektronix Shutter Actuator Model 2 is a mains-powered device that provides
The Tektronix Shutter Actuator Model 2 is a mains-powered electromechanical system that enables an oscilloscope camera
the power to operate a rotary solenoid for taking a photograph with an oscilloscope camera.
to take a photograph when an electrical remote control signal occurs.
The Shutter Actuator Model 2 was produced in a two versions:
This allows, for example, an unattended setup where the oscilloscope screen is photographed
* Tek part number 016-230, for countries with 115 V mains power
when a rare electrical event occurs. The system is composed of a power supply and a solenoid.
* Tek part number 016-236, for countries with 230 V mains power


For countries with 115 V mains power:
* Tek part number 016-230 for the power supply
* Tek part number 016-218 for the solenoid


* [[Media:Tek shutter actuator model 2.pdf|Tektronix Shutter Actuator Model 2 Documentation (PDF)]]
For countries with 230 V mains power:
* Tek part number 016-236 for the power supply
* Tek part number 016-235 for the solenoid
 
==Manuals==
* [[Media:Tek shutter actuator model 2.pdf|Tektronix Shutter Actuator Model 2 Power Supply Documentation (PDF)]]
* [[Media:Tek shutter actuator model 2 rotary solenoid.pdf|Tektronix Shutter Actuator Model 2 Rotary Solenoid Documentation (PDF)]]
Retrieved from "https://w140.com/tekwiki/wiki/Shutter_Actuator_Model_2"