7M11: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
7M11 is a plugin which contains two independent 50 Ohms analog delay lines with 75nS each. Risetime is specified as max. 175pS and attenuation is fixed at two. A separate trigger output is available to eliminate an external power splitter and it is attenuated by a factor of five. Unfortunately there are four GR-874 50-ohm connectors and BNC-adapters are hard to find in the mean time. | 7M11 is a plugin which contains two independent 50 Ohms analog delay lines with 75nS each. Risetime is specified as max. 175pS and attenuation is fixed at two. A separate trigger output is available to eliminate an external power splitter and it is attenuated by a factor of five. Unfortunately there are four GR-874 50-ohm connectors and BNC-adapters are hard to find in the mean time. | ||
Max. signal allowed is +-5V. | Max. signal allowed is +-5V. Mass is about 2.5kg, so be carefully when plump it into the slot. Generally Tektronix specifies, not to ship mainframes with insertet plugins, to protect the bus connectors! | ||
Because its completely passive and has no bus connector, it can be operated outside of the mainframe on the desk, giving free an additional slot for another plugin. | Because its completely passive and has no bus connector, it can be operated outside of the mainframe on the desk, giving free an additional slot for another plugin. | ||
[[Image:7M11.jpg|200px|thumb|left|Connectors were changed to BNC with adequately quality]] | [[Image:7M11.jpg|200px|thumb|left|Connectors were changed to BNC with adequately quality]] |