WR501: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(info about delay lines usually missing on the WR501) |
||
Line 1: | Line 1: | ||
The WR 501 is a 16-channel word recognizer with delay, packaged in a TM 500 plug-in. The WR 501 can | |||
provide a trigger signal for an oscilloscope or provide a trigger signal and data acquisition for | |||
the LA 501 Logic Analyzer. | |||
Note that DL15 and DL115, the 24 pin delay lines that fit in the sockets on each board are | |||
only found on units that were interconnected to an LA 501. The empty socket for DL15 is visible | |||
in the pictures below, on the A1 daughter board. The socket for DL115 is on the board underneath A1, | |||
on the A2 main board. They are unnecessary if you are using the WR501 to trigger a scope. | |||
These ECL delay lines, pn 119-0775-00, 10 nS, 100 Ohm, can be found in the 7D01 logic analyzer plugin | |||
for the 7000 series scopes. | |||
<gallery> | <gallery> | ||
Image:wr501_front.jpg | Image:wr501_front.jpg |