213: Difference between revisions
Deanhuster (talk | contribs) No edit summary |
Deanhuster (talk | contribs) No edit summary |
||
| Line 21: | Line 21: | ||
DIRECT CURRENT VOLTS | DIRECT CURRENT VOLTS | ||
Range: 0.1v to 1000v | Range: 0.1v to 1000v | ||
Input Resistance: 10MΩ | Input Resistance: 10MΩ | ||
| Line 26: | Line 27: | ||
TRUE RMS VOLTS | TRUE RMS VOLTS | ||
0.1v: ±2.5% (DC); ±1.5% (40 Hz – 4KHz); ±3.5% (4KHz – 40KHz) | 0.1v: ±2.5% (DC); ±1.5% (40 Hz – 4KHz); ±3.5% (4KHz – 40KHz) | ||
1, 10, 100v: ±2% (DC); ±1% (40Hz – 40KHz) | 1, 10, 100v: ±2% (DC); ±1% (40Hz – 40KHz) | ||
| Line 31: | Line 33: | ||
DC & RMS CURRENT | DC & RMS CURRENT | ||
0.1mA = 1000Ωs; 1mA = 100Ω; 10mA = 10.2Ω; 100mA = 1.2Ω; 1000mA = 0.3Ω | 0.1mA = 1000Ωs; 1mA = 100Ω; 10mA = 10.2Ω; 100mA = 1.2Ω; 1000mA = 0.3Ω | ||
DC CURRENT | DC CURRENT | ||
0.1mA: ±0.5%, ±3 counts; 1mA – 1000mA: ±0.25%, ±3 counts | 0.1mA: ±0.5%, ±3 counts; 1mA – 1000mA: ±0.25%, ±3 counts | ||
TRUE RMS CURRENT | TRUE RMS CURRENT | ||
0.1mA: ±2.5%, ±5 counts (DC); ±1.5%, ±5 counts (40Hz – 4KHz); ±4.5%,±5 counts (4KHz - 40KHz) | 0.1mA: ±2.5%, ±5 counts (DC); ±1.5%, ±5 counts (40Hz – 4KHz); ±4.5%,±5 counts (4KHz - 40KHz) | ||
1mA – 1000mA: ±2.5%, ±5 counts (DC); ±1.5%, ±5 counts (40Hz – 4KHz); ±3.5%,±5 counts (4KHz - 40KHz) | 1mA – 1000mA: ±2.5%, ±5 counts (DC); ±1.5%, ±5 counts (40Hz – 4KHz); ±3.5%,±5 counts (4KHz - 40KHz) | ||
RESISTANCE | RESISTANCE | ||
1KΩ: ±0.5%, ±3 counts; 10KΩ – 1MΩ: ±0.5%, ±1 count; 10MΩ: ±1%, ±1 count | 1KΩ: ±0.5%, ±3 counts; 10KΩ – 1MΩ: ±0.5%, ±1 count; 10MΩ: ±1%, ±1 count | ||
OSCILLOSCOPE | OSCILLOSCOPE | ||
| Line 54: | Line 62: | ||
HORIZONTAL: | HORIZONTAL: | ||
SWEEP: 500ms – 2µs/DIV, ±5% (magnified or unmagnified) | SWEEP: 500ms – 2µs/DIV, ±5% (magnified or unmagnified) | ||
Revision as of 07:03, 16 September 2014
The Tektronix 213 is a miniature portable oscilloscope introduced in 1975. It combines a 3½-digit DMM and a 1 MHz single channel scope in one unit. The maximum sweep rate is 0.4 μs/div with ×10 sweep magnifier.
The 213 provides true RMS voltage and current measurements. It is battery or AC line powered.
Specifications
DIGITAL MULTIMETER
DIRECT CURRENT VOLTS
Range: 0.1v to 1000v Input Resistance: 10MΩ Accuracy, 0.1v & 1v: ±0.1%, ±3 counts; 10v & 100v: ±0.15%, ±1 count; 1000v: ±0.2%, ±1 count
TRUE RMS VOLTS
0.1v: ±2.5% (DC); ±1.5% (40 Hz – 4KHz); ±3.5% (4KHz – 40KHz) 1, 10, 100v: ±2% (DC); ±1% (40Hz – 40KHz) 1000v: ±2% (DC); ±1% (40 Hz – 4KHz); ±2% (4KHz – 40KHz)
DC & RMS CURRENT
0.1mA = 1000Ωs; 1mA = 100Ω; 10mA = 10.2Ω; 100mA = 1.2Ω; 1000mA = 0.3Ω
DC CURRENT
0.1mA: ±0.5%, ±3 counts; 1mA – 1000mA: ±0.25%, ±3 counts
TRUE RMS CURRENT
0.1mA: ±2.5%, ±5 counts (DC); ±1.5%, ±5 counts (40Hz – 4KHz); ±4.5%,±5 counts (4KHz - 40KHz) 1mA – 1000mA: ±2.5%, ±5 counts (DC); ±1.5%, ±5 counts (40Hz – 4KHz); ±3.5%,±5 counts (4KHz - 40KHz)
RESISTANCE
1KΩ: ±0.5%, ±3 counts; 10KΩ – 1MΩ: ±0.5%, ±1 count; 10MΩ: ±1%, ±1 count
OSCILLOSCOPE
VERTICAL: 5mv – 100V/DIV, ±3%, DC – 400KHz (5mV – 10mV/DIV); DC – 1MHz (20mV – 100v/DIV 5µA – 100mA/DIV, ±3%, DC – 200KHz (5µA – 10µA/DIV); DC – 400KHz (20µA – 200mA/DIV)
Input resistance: 10MΩ, 150pF (5mV – 1V/DIV); 100pf (2V – 100V/DIV)
Risetime: 875ns (5mV – 10mV/DIV); 350ns (20mV – 100v/DIV)
HORIZONTAL:
SWEEP: 500ms – 2µs/DIV, ±5% (magnified or unmagnified)
BATTERIES: 2 X “D” NiCd cells Typical operating time as maximum intensity after full charge cycle: 3.5 hours Charge time: 16 hours
MAINS OPERATION: 90 – 136vac, 48 – 62 Hz (Option 1: 180 – 250 vdc or 180 – 250 vac, 48 – 62 Hz) Power consumption: Less than 8 watts
Links
- EEVblog #628 – Tektronix 213 Vintage Portable Oscilloscope Teardown Video and Photo Set
- Tektronix 213 DMM Repair Progress video
Pictures
-
-
-
In DMM mode
-
Attenuator and Input Amplifier Schematic
-
GM and RMS Converter Schematic
-
Battery Charger and Power Supply Schematic
-
HV and CRT Schematic
-
A-D Converter and Character Generator Schematic
