THS720: Difference between revisions
Jump to navigation
Jump to search
(start of THS series updates) |
No edit summary |
||
| Line 1: | Line 1: | ||
[[Image:Ths720std-comp.jpg|thumb|400px|right|Tektronix THS720 Std probe compensation]] | |||
The Tektronix THS720 is a portable 100 MHz 500 MS/s (each channel) two | The Tektronix THS720 is a portable 100 MHz 500 MS/s (each channel) two | ||
channel digital oscilloscope. There were two variants, the THS720 STD | channel digital oscilloscope. There were two variants, the THS720 STD | ||
| Line 17: | Line 19: | ||
See [[THS700]]. | See [[THS700]]. | ||
==Pictures== | |||
<gallery> | |||
File:Ths720std-comp.jpg|THS720 Std displaying probe compensation waveform | |||
File:ths720std-backpcb.jpg|THS720 back of PCB | |||
</gallery> | |||
[[Category:THS series scopes]] | [[Category:THS series scopes]] | ||
Revision as of 14:29, 20 October 2014
The Tektronix THS720 is a portable 100 MHz 500 MS/s (each channel) two channel digital oscilloscope. There were two variants, the THS720 STD and the THS720A. The primary difference is that the THS720A will trigger from the DMM input.
Internals
Primary microprocessor is the Motorola/Freescale MC68331CFC16. There is also an Intel flash E28F008SA120 for setup, cal and waveform storage.
Repair Issues
The service manual shows how to remove the calibration protection jumper. The DMM calibration step requires a good calibrator capable of doing 850 VDC, and 600 VAC at 500 Hz.
See THS700.
Pictures
-
THS720 Std displaying probe compensation waveform
-
THS720 back of PCB
