W: Difference between revisions
Vintage dave (talk | contribs) m (specs) |
Vintage dave (talk | contribs) (more specs and comparisons) |
||
Line 1: | Line 1: | ||
The Type W is a plug-in amplifier for [[500-series scopes]]. Its bandwidth varies from 23MHz to 8MHz | The Type W is a plug-in amplifier for [[500-series scopes]]. Its bandwidth varies from 23MHz to 8MHz | ||
depending on gain. It achieves 20,000 to 1 common-mode rejection at DC and low frequencies. | depending on gain. Only modestly faster than its predecessor, Type [[Z]], Type W extends performance | ||
It has a built in precision variable voltage supply, "Vc". | in terms of sensitivity, reaching 1mV/div. It achieves 20,000 to 1 common-mode rejection at DC and low frequencies. | ||
It has a built in precision variable voltage supply, "Vc", which is controlled by a ten-turn pot and can vary from either -1.1V to +1.1V or -11V to +11V. | |||
Type W has two signal inputs, "A" and "B". A mode switch selects between displaying A-Vc, A-B, or Vc-B. | |||
The "A-B" mode is particularly useful for displaying the current in a sense resistor, | The "A-B" mode is particularly useful for displaying the current in a sense resistor, | ||
while the other modes provide "slideback" measurements of small variations superimposed on a large constant. | while the other modes provide "slideback" measurements of small variations superimposed on a large constant. | ||
An output of Vc is provided on the front panel of the Type W. | An output of Vc is provided on the front panel of the Type W. Unlike Type [[Z]], | ||
Type W has two gain axes, a decade attenuator and a 1-2-5-10-20-50 selector, reminiscent of Type [[D]] from ten years before. | |||
Type W is the only letter-series plugin with an "infinite resistance" input mode selectable at the front panel. | |||
(Type [[1A5]] has an internal jumper than can be cut.) | |||
In the letter-series timeline of differential amps, | In the letter-series timeline of differential amps, Type W, introduced in 1965, follows Type [[Z]] and precedes Type [[1A5]]. | ||
* http://bama.edebris.com/manuals/tek/w/ | * http://bama.edebris.com/manuals/tek/w/ |
Revision as of 11:31, 21 September 2010
The Type W is a plug-in amplifier for 500-series scopes. Its bandwidth varies from 23MHz to 8MHz depending on gain. Only modestly faster than its predecessor, Type Z, Type W extends performance in terms of sensitivity, reaching 1mV/div. It achieves 20,000 to 1 common-mode rejection at DC and low frequencies. It has a built in precision variable voltage supply, "Vc", which is controlled by a ten-turn pot and can vary from either -1.1V to +1.1V or -11V to +11V. Type W has two signal inputs, "A" and "B". A mode switch selects between displaying A-Vc, A-B, or Vc-B. The "A-B" mode is particularly useful for displaying the current in a sense resistor, while the other modes provide "slideback" measurements of small variations superimposed on a large constant. An output of Vc is provided on the front panel of the Type W. Unlike Type Z, Type W has two gain axes, a decade attenuator and a 1-2-5-10-20-50 selector, reminiscent of Type D from ten years before. Type W is the only letter-series plugin with an "infinite resistance" input mode selectable at the front panel. (Type 1A5 has an internal jumper than can be cut.)
In the letter-series timeline of differential amps, Type W, introduced in 1965, follows Type Z and precedes Type 1A5.
-
Front view.
-
Top-left view.
-
Bottom view.