82: Difference between revisions
Jump to navigation
Jump to search
(creation) |
(details) |
||
Line 1: | Line 1: | ||
The Tektronix Type 82 is a | The Tektronix Type 82 is a dual-trace plug-in for the 585 and 585A oscilloscopes. | ||
The Type 82 combined with a 585 or 585A provides a 4 nanosecond risetime. | |||
The front end of the Type 82 is a 7586 nuvistor cathode-follower, followed by bipolar diff-amps and diode channel switching, followed by a distributed output amplifier made of three 6DJ8 tubes, | |||
with differential 93-ohm outputs. | |||
The use of a differential amplifier in a plug-in is unusual. Note that the 58x series differs from other 500-series scopes mainly in the fact the vertical interface is a low controlled impedance (93 ohms), as opposed to other 500-series scopes that present a high impedance to the plug-in. | |||
<gallery> | <gallery> |
Revision as of 10:12, 19 December 2008
The Tektronix Type 82 is a dual-trace plug-in for the 585 and 585A oscilloscopes. The Type 82 combined with a 585 or 585A provides a 4 nanosecond risetime. The front end of the Type 82 is a 7586 nuvistor cathode-follower, followed by bipolar diff-amps and diode channel switching, followed by a distributed output amplifier made of three 6DJ8 tubes, with differential 93-ohm outputs. The use of a differential amplifier in a plug-in is unusual. Note that the 58x series differs from other 500-series scopes mainly in the fact the vertical interface is a low controlled impedance (93 ohms), as opposed to other 500-series scopes that present a high impedance to the plug-in.
-
Front view.
-
Left view.
-
Top view.
-
Right view.