O: Difference between revisions
David Wise (talk | contribs) m (Not longest-lived; not produced right to the end.) |
David Wise (talk | contribs) mNo edit summary |
||
| Line 26: | Line 26: | ||
Type O was [[introduced in 1962|introduced in mid-1962]] and was | Type O was [[introduced in 1962|introduced in mid-1962]] and was | ||
available through 1973, making it the next-longest-lived plug-in, behind | available through 1973, making it the next-longest-lived plug-in, behind [[CA|Type CA]]. | ||
The Type O can be used with any of the following adapters: | The Type O can be used with any of the following adapters: | ||
Revision as of 13:21, 2 August 2017
Template:Plugin Sidebar 2 The Tektronix Type O is a letter-series plug-in that contains two op-amps.
The input and feedback networks of the op-amps can be configured from the front panel using knobs and/or user-supplied components. There are sockets on the front panel for banana plugs.
Type O also has a regular signal input that does not involve the op-amps. A mode switch selects which op-amp's output will be displayed, or the regular signal input.
Regular signal bandwidth is 25 MHz, maximum sensitivity is 50 mV/div, op-amp gain-bandwidth product is 15 MHz, and open-loop DC gain is 2500.
Type O was introduced in mid-1962 and was available through 1973, making it the next-longest-lived plug-in, behind Type CA.
The Type O can be used with any of the following adapters: 013-081, 013-068, 013-048, 013-0048-01, 013-0049-01, 013-0086-00, 013-0067-00 (manual below).
Pictures
-
Front view.
-
Top view.
-
Right view.
-
Left view.
-
-
-
-
Opamp Schematic
-
Preamp Schematic
