O: Difference between revisions
David Wise (talk | contribs) m (nowhere near longest, many lasted 16 if you count 53/54) |
No edit summary |
||
Line 8: | Line 8: | ||
discontinued=1974 | | discontinued=1974 | | ||
manuals= | manuals= | ||
* [http://bama.edebris.com/manuals/tek/o/ Tektronix Type O Manual (BAMA)] | * [http://w140.com/mmm/tek-o.pdf Tektronix Type O Manual (PDF)] | ||
* [http://bama.edebris.com/manuals/tek/o/ Tektronix Type O Manual (BAMA, offline?)] | |||
* [http://w140.com/tek_fcp/tek_type_o_factory_cal_proc.pdf Tektronix Type O Factory Calibration Procedure (PDF)] | * [http://w140.com/tek_fcp/tek_type_o_factory_cal_proc.pdf Tektronix Type O Factory Calibration Procedure (PDF)] | ||
* [http://w140.com/tek_type-o_1968_catalog.pdf Tektronix Type O in 1968 Catalog (PDF)] | * [http://w140.com/tek_type-o_1968_catalog.pdf Tektronix Type O in 1968 Catalog (PDF)] |
Revision as of 14:44, 4 September 2017
Template:Plugin Sidebar 2 The Tektronix Type O is a letter-series plug-in that contains two op-amps.
The input and feedback networks of the op-amps can be configured from the front panel using knobs and/or user-supplied components. There are sockets on the front panel for banana plugs.
Type O also has a regular signal input that does not involve the op-amps. A mode switch selects which op-amp's output will be displayed, or the regular signal input.
Regular signal bandwidth is 25 MHz, maximum sensitivity is 50 mV/div, op-amp gain-bandwidth product is 15 MHz, and open-loop DC gain is 2500.
Type O was introduced in mid-1962 and was available through 1973.
The Type O can be used with any of the following adapters: 013-081, 013-068, 013-048, 013-0048-01, 013-0049-01, 013-0086-00, 013-0067-00 (manual below).
Pictures
-
Front view.
-
Top view.
-
Right view.
-
Left view.
-
-
-
-
Opamp Schematic
-
Preamp Schematic