PS503

Manuals – Specifications – Links – Pictures

The Tektronix PS503 is a triple power supply plug-in for the TM500 system.

It supplies 0 to −20 V and 0 to +20 V at 1 A (0.4 A in low power compartments) as well as +5 V at 1 A.

The variable supplies can be adjusted independently or can track one another, and are floating; the 5 V output is ground referenced.

Key Specifications

	— Variable outputs —
Output voltage	0 to +20 V and 0 to −20 V
Current limit	<100 mA to >1 A (0.4 A if used in low power compartment)
Ripple and noise	<3 mVp-p @ 1 A
	— Fixed output —
Output voltage3	5 V ±5%, 1 A (ground referenced)
Current limit	fixed 1 A
Ripple and noise	<3 mVp-p @ 1 A

Rear interface signals

• +20 V output (22A)
• −20 V output (22B)
• ±20 V common (24A, 24B)

(the connections below require various jumper changes in the PS503 as described in the manual)

• Remote resistor programming (via 25A, 25B)
• Remote voltage programming (via 25A, 25B)
• Remote sensing (+Sense 23A, −Sense 23B)

Pictures

• 

  PS503A, front panel

• 

  PS503A, left side

• 

  PS503A, right side

• 

  PS503A

• 

  PS503A

• 

  PS503A

• 

  Switch S95 in rear of PS503 (detects high power compartment)

• 

  PS503A Rear connector