454: Difference between revisions
No edit summary |
No edit summary |
||
Line 58: | Line 58: | ||
Tek 454 right side.jpg | Tek 454 right side.jpg | ||
Tek 454 wp.jpg|traces | Tek 454 wp.jpg|traces | ||
Tek 454 276702 1.jpg | <!--Tek 454 276702 1.jpg--> | ||
Tek 454 276702 2.jpg | Tek 454 276702 2.jpg | ||
Tek 454 276702 3.jpg | Tek 454 276702 3.jpg |
Revision as of 13:12, 25 November 2018
The Tektronix 454 is a 150 MHz portable dual-trace scope introduced in March 1967.
It can be seen as an improved 453. The successor 454A was introduced in 1971.
The 454 is the fastest general-purpose Tektronix scope that does not use proprietary hybrid or integrated circuits. It uses a CRT with distributed vertical deflection plates.
Specifications
With the input sensitivity set to 10 mV/div and above, the 454A has a vertical bandwidth of 150 MHz. At 5 mV/div it is 100 MHz, and at 2 mV/div it is 50 MHz.
It is possible to cascade the channel-1 and channel-2 input amplifiers to obtain a sensitivity of 400 μV/div. In that configuration, the vertical bandwidth is 33 MHz.
The 454 weighs 29 pounds and consumes about 130 watts. please add
Internals
The 454 has a 140 ns delay line in the signal path after the input channel switching and before the main vertical amplifier. There is a phase equalizer after the delay line to mitigate the harm done to pulse fidelity by the delay line.
The 454 uses the T4540 CRT.
Links
Pictures
-
454A Front
-
454A Bottom
-
454A Vertical amp
-
454A Top
-
-
-
-
'A' intensified during 'B' mode
-
-
-
-
traces
-
-