133: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(added schematics) |
||
| Line 1: | Line 1: | ||
The Tektronix 133 is an external enclosure and power supply for a letter-series or 1-series plug-in. The enclosure supplies power to the plug-in and the outputs from the plug-in are available. The bandwidth of the 133's outputs is 100Khz, which is much slower than the 16MHz bandwidth of the 132. However, the 133 has a 2-ohm output impedance compared to 5k-ohms for the 132. And the 133 can drive 1.5 amperes at its output, versus a maximum of 10mA for the 132. | The Tektronix 133 is an external enclosure and power supply for a letter-series or 1-series plug-in. The enclosure supplies power to the plug-in and the outputs from the plug-in are available. The bandwidth of the 133's outputs is 100Khz, which is much slower than the 16MHz bandwidth of the 132. However, the 133 has a 2-ohm output impedance compared to 5k-ohms for the 132. And the 133 can drive 1.5 amperes at its output, versus a maximum of 10mA for the 132. | ||
The schematics are here: | |||
* http://w140.com/kurt/tek_133_schematics.pdf | |||
<gallery> | <gallery> | ||
Image:133front.jpg|front view | Image:133front.jpg|front view | ||
Revision as of 07:15, 8 April 2009
The Tektronix 133 is an external enclosure and power supply for a letter-series or 1-series plug-in. The enclosure supplies power to the plug-in and the outputs from the plug-in are available. The bandwidth of the 133's outputs is 100Khz, which is much slower than the 16MHz bandwidth of the 132. However, the 133 has a 2-ohm output impedance compared to 5k-ohms for the 132. And the 133 can drive 1.5 amperes at its output, versus a maximum of 10mA for the 132.
The schematics are here:
-
front view
-
front inside
-
right view
-
top view
-
left view shows power supply and TO-3 output power transistors
-
bottom view shows solid state rectifiers and capacitors for low-voltage high-current output amplifier
