TDS1012: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 10: | Line 10: | ||
manuals= | manuals= | ||
* [[Media:071-1064-00.pdf|TDS1000 and TDS2000 Series user manual]] (1.2 MB, PDF, OCR) | * [[Media:071-1064-00.pdf|TDS1000 and TDS2000 Series user manual]] (1.2 MB, PDF, OCR) | ||
* [[Media:071-1064-00_TDS1000_and_TDS2000-Series_User_Manual_Revision_A.pdf|071-1064-00 TDS1000 and TDS2000-Series User Manual Revision A]] (10.32 MB PDF) | * [[Media:071-1064-00_TDS1000_and_TDS2000-Series_User_Manual_Revision_A.pdf| 071-1064-00 TDS1000 and TDS2000-Series User Manual Revision A]] (10.32 MB PDF) | ||
* [[Media:071-1076-02_TDS1000_and_TDS2000-Series_Service_Manual.pdf| | * [[Media:071-1076-02_TDS1000_and_TDS2000-Series_Service_Manual.pdf| 071-1076-02 TDS1000 and TDS2000-Series Service _Manual]] (8.032 MB PDF) | ||
* [[Media:077-0444-01_TDS1000, & TDS2000-Series_Programmer_Manual.pdf| | * [[Media:077-0444-01_TDS1000, & TDS2000-Series_Programmer_Manual.pdf| 077-0444-01 TDS1000, & TDS2000-Series Programmer Manual]] (15.25 MB PDF) | ||
* [[Media:3GW_15314_6_TDS1000 and TDS2000 Series Oscilloscopes_Datasheet.pdf|03GW 15314 6 TDS1000 and TDS2000 Series Oscilloscopes Datasheet]] (666 KB PDF) | * [[Media:3GW_15314_6_TDS1000 and TDS2000 Series Oscilloscopes_Datasheet.pdf| 03GW 15314 6 TDS1000 and TDS2000 Series Oscilloscopes Datasheet]] (666 KB PDF) | ||
* [[Media:TDS1000 AND TDS2000 SERIES FIRMWARE UPDATE.txt| | * [[Media:TDS1000 AND TDS2000 SERIES FIRMWARE UPDATE.txt| TDS1000 AND TDS2000 SERIES FIRMWARE UPDATE]] (786 B TXT) | ||
}} | }} | ||
Revision as of 15:24, 24 May 2019
The Tektronix TDS1012 is a dual-channel, 100 MHz, 1 GS/s digital scope with a monochrome LCD screen.
Key Specifications
{{Spec | Acquisition Modes| Peak Detect, Sample, Average, Single Sequence }| Display (1/4 VGA LCD) | Mono |
|---|---|
| Bandwidth | 100 MHz; Bandwidth is 20 MHz at 2 mV/div |
| Channels | 2 |
| Ext Trigger Input | Present |
| Sample Rate on each channel | 1.0 GS/s |
| Record Length | 2.5 K points |
| Vertical Resolution | 8-bits |
| Vertical Sensitivity | 2 mV to 5 V/div with calibrated fine adjustment |
| DC Vertical Accuracy | ±3% |
| Vertical Zoom | Vertical expand or compress a live or stopped waveform |
| Max Imput Voltage | 300 VRMS CAT II; derated at 20 dB/decade above 100 kHz to 13 Vp-p AC at 3 MHz and above |
| Position Range | 2 mV to 200 mV/div ±2 V; >200 mV to 5 V/div ±50 V |
| BW Limit | 20 MHz |
| Input Coupling | AC, DC, GND |
| Input Impedance | 1 MΩ in parallel with 20 pF |
| Time Base Range | 5 ns to 50 s/div |
| Time Base Accuracy | 50 ppm |
| Horizontal Zoom | Horizontal expand or compress a live or stopped waveform |
| Trigger Types | Edge (rising or falling), Video (NTSC, PAL, SECAM), Pulse Width (or Glitch) |
| Trigger Modes | Auto, Normal, Single Sequence |
| Trigger Source | CH1, CH2, Ext, Ext/5, AC Line |
| Trigger View | Displays trigger signal while trigger view button is depressed |
| Trigger Signal Frequency Readout | Provides a frequency readout of the trigger source |
| Cursors | Time, Voltage, Measurements: [Δ]T, 1/[Δ]T (frequency), [Δ]V |
| Automatic Waveform Measurements | Period, Frequency, +Width, -Width, Rise Time, Fall Time, Max, Min, Peak-to-Peak, Mean, Cycle RMS |
| Waveform Processing | Operators (Add, Subtract, FFT); FFT (Windows: Hanning, Flat Top, Rectangular; 2048 sample points; Autoset Menu (Single-button, automatic setup of all channels for vertical, horizontal, and trigger systems with undo autoset) |
| Autoset Menu | Square Wave (Single-cycle, Multi-cycle, Rising or Falling Edge); Sine Wave (Single-cycle, Multi-cycle, FFT Spectrum); Video (NTSC, PAL, SECAM) Field: All, Odd or Even Line:All or Selective Line Number |
| Interface | Centronics type parallel, RS-232, GPIB, Compact Flash Memory |
| Probes | Two P2220 200 MHz ×10 to x1 probes BNC connector |
