067-0625-00: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 20: | Line 20: | ||
==Manuals== | ==Manuals== | ||
* [http://w140.com/tek_067-0625-00.pdf Tektronix 067-0625-00 Manual (PDF)] | * [http://w140.com/tek_067-0625-00.pdf Tektronix 067-0625-00 Manual (PDF)] | ||
* [[Media:062-1306-00.pdf]] | |||
* [[Media:Tek 067-0625-00 service cal procedure.pdf|Tektronix 067-0625 Service Calibration Procedure (PDF, needs OCR)]] | * [[Media:Tek 067-0625-00 service cal procedure.pdf|Tektronix 067-0625 Service Calibration Procedure (PDF, needs OCR)]] | ||
Revision as of 16:51, 16 June 2019
The Tektronix 067-0625-00 is a peak-to-peak detector designed to measure the output voltage flatness of constant amplitude signal generators in the 50 Hz to 500 MHz range. The input amplitude should be 1.2 Vp-p.
The input is a GR-874 connector terminated in 50 Ω.
There are two outputs, one for the positive peak voltage and one for the negative peak voltage. The outputs are BNC females, intended for connection to high-impedance low-frequency instrumentation.
Up to serial number B003240, the 067-0625-00 used 1.35 V mercury batteries for biasing the detector diodes. Starting at serial number B003241, 1.5 V alkaline batteries were used.
Key Specifications
| Sensitivity | 10 ±1 mV/% input change at 1.2 Vp-p |
|---|---|
| Temperature Range | 23°C ±10°C |
| Output | Into floating 2 MΩ load or differential oscilloscope with 1 MΩ inputs |
Manuals
- Tektronix 067-0625-00 Manual (PDF)
- Media:062-1306-00.pdf
- Tektronix 067-0625 Service Calibration Procedure (PDF, needs OCR)
