Nicolet 526: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 2: | Line 2: | ||
The modifications performed by Nicolet include fan cooling via the bottom panel of the scope, | The modifications performed by Nicolet include fan cooling via the bottom panel of the scope, | ||
and a 12-pin connector on the rear panel of the scope, connected to the interface board, connector J604. | and a 12-pin connector on the rear panel of the scope, connected to the interface board, connector J604. | ||
The 12-pin rear-panel connector has its pins numbered on the inside of the connector. | |||
{| class="wikitable" | |||
|- | |||
! Pin | |||
! Function | |||
! Comment | |||
|- | |||
| 1 || | || | |||
|- | |||
| 2 || | || | |||
|- | |||
| 3 || | || | |||
|- | |||
| 4 || | || | |||
|- | |||
| 5 || | || | |||
|- | |||
| 6 || | || | |||
|- | |||
| 7 || | || | |||
|- | |||
| 8 || | || | |||
|- | |||
| 9 || | || | |||
|- | |||
| 10 || | Ground || | |||
|- | |||
| 11 || | || | |||
|- | |||
| 12 || | || | |||
|} | |||
<gallery> | <gallery> | ||
Revision as of 18:12, 11 November 2020
The Nicolet 526 is a signal averager that was built into a modified OEMed Tektronix 5110 (5103N/D10) mainframe. The modifications performed by Nicolet include fan cooling via the bottom panel of the scope, and a 12-pin connector on the rear panel of the scope, connected to the interface board, connector J604.
The 12-pin rear-panel connector has its pins numbered on the inside of the connector.
| Pin | Function | Comment |
|---|---|---|
| 1 | ||
| 2 | ||
| 3 | ||
| 4 | ||
| 5 | ||
| 6 | ||
| 7 | ||
| 8 | ||
| 9 | ||
| 10 | Ground | |
| 11 | ||
| 12 |
-
Front
-
Top
-
Left
-
Right
-
Bottom
-
ADC and Register
-
ADC and Register
-
Address Board
-
Address Board
-
Control Board
-
Control Board
-
Memory
-
Memory
-
Rear
-
Top front
-
Right front
-
Bottom front
-
Mainframe rear connector internal
-
Mainframe rear connector external
-
Mainframe rear connector to J604
