81: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 11: Line 11:
* [http://w140.com/tek-81.pdf Tektronix Type 81 Manual (PDF)]
* [http://w140.com/tek-81.pdf Tektronix Type 81 Manual (PDF)]
* [http://w140.com/tek-81a.pdf Tektronix Type 81A Manual (PDF)]
* [http://w140.com/tek-81a.pdf Tektronix Type 81A Manual (PDF)]
* [http://w140.com/tek_fcp/tek_type_81_factory_cal_proc.pdf Tektronix Type 81 Factory Calibration Procedure (PDF)]


<gallery>
<gallery>
Image:Type-81-schem.png
Image:Type-81-schem.png
</gallery>
</gallery>

Revision as of 06:12, 7 July 2012

The Tektronix Type 81 is a plug-in adapter so that letter-series and 1-series plug-ins can be used in 580-series scopes. The Type 81 contains a two-stage amplifier. The letter-series plug-in drives the input stage of the Type 81 which is a high impedance, similar to the input of a 530-, 540-, or 550-series scope. The second stage of the Type 81 is a cathode-follower, which drives the 580-series scope using a low impedance, as is required by 580-series scopes.

The 81 and 81A are significantly different. Type 81 is tube-based and has bandwidth of 33 megacycles. Type 81A is solid-state and has bandwidth of 50 megacycles.