040-0413-00: Difference between revisions
Jump to navigation
Jump to search
(→Link) |
|||
| Line 1: | Line 1: | ||
Tektronix 040-0413-00 is a modification kit for the [[560-series_scopes|560 series]] timebase models [[67]], [[2B67]], [[3B1]], [[3B3]], and [[3B4]] for compatibility with [[3L5]] and [[3L10]] spectrum analyzer vertical plug-ins. This mod enables the sweep signal to pin 18 of the [[ 560_Series_plug-in_interface|plug-in interlace]] to drive the sweep oscillator in the spectrum analyzer. This mod adds a resistor to the sawtooth cathode follower to drive the signal to pin 18 via a coax cable. | Tektronix 040-0413-00 is a modification kit for the [[560-series_scopes|560 series]] timebase models [[67]], [[2B67]], [[3B1]], [[3B3]], and [[3B4]] for compatibility with [[3L5]] and [[3L10]] spectrum analyzer vertical plug-ins. This mod enables the sweep signal to pin 18 of the [[ 560_Series_plug-in_interface|plug-in interlace]] to drive the sweep oscillator in the spectrum analyzer. This mod adds a resistor to the sawtooth cathode follower to drive the signal to pin 18 via a coax cable. | ||
[http://www.hakanh.com/dl/docs/kitinstructions/040-0413-00.pdf| Mod 040-0413-00 ] | |||
Revision as of 19:08, 27 June 2021
Tektronix 040-0413-00 is a modification kit for the 560 series timebase models 67, 2B67, 3B1, 3B3, and 3B4 for compatibility with 3L5 and 3L10 spectrum analyzer vertical plug-ins. This mod enables the sweep signal to pin 18 of the plug-in interlace to drive the sweep oscillator in the spectrum analyzer. This mod adds a resistor to the sawtooth cathode follower to drive the signal to pin 18 via a coax cable.