TDS794: Difference between revisions
(Added some pictures of D variant and probe) |
(added HDD+FDD replacement tip) |
||
Line 29: | Line 29: | ||
Tek_TDS794D_front_02.jpg | Tek_TDS794D_front_02.jpg | ||
Tek_TDS794D_hdd_01.jpg | Tek_TDS794D_hdd_01.jpg | ||
Tek_TDS794D_left.jpg | Tek_TDS794D_left.jpg | ||
Tek_TDS794D_rear_01.jpg | Tek_TDS794D_rear_01.jpg | ||
Line 55: | Line 50: | ||
Tek_P6339A_logic_01.jpg||P6339A logic board | Tek_P6339A_logic_01.jpg||P6339A logic board | ||
</gallery> | </gallery> | ||
===Replacing the HDD=== | |||
In case of a malfunction, the original hard disk can be exchanged for a Compact Flash card. Make sure that the replacement card supports the ability to be used as a "fixed disk". Usually these are called "industrial grade" cards. "Consumer grade" CF cards are usually detected as "removable drives" and won't work in the scope. Since the scope supports FAT16, the maximum partition size is roughly 4GB. | |||
<gallery> | |||
Tek_TDS794D_hdd_01.jpg|Inner board with installed HDD option | |||
Tek_TDS794D_hdd_02.jpg|Hard disk drive with mounting brackets | |||
Tek_TDS794D_hdd_04.jpg|Top view of HDD | |||
Tek_TDS794D_hdd_03.jpg|Bottom view with HDD | |||
Tek_TDS794D_hdd_05.jpg|Example of a consumer grade and a industrial grade CF card. Also shown are two CF-PATA to 2.5" IDE adapters. | |||
Tek_TDS794D_hdd_06.jpg|Comparison of CF card and original HDD | |||
</gallery> | |||
===Replacing the FDD with a USB drive=== | |||
The internal FDD drive can be replaced with a GOTEK Floppy Emulator. The conversion is described on the [[TDS420]] page. | |||
<gallery> | |||
Tek_TDS794D_front_01.jpg|TDS794D with installed GOTEK Floppy emulator | |||
</gallery> | |||
[[Category:TDS700 series scopes]] | [[Category:TDS700 series scopes]] |
Revision as of 02:07, 2 July 2021
The Tektronix TDS794 is a 2 GHz, 4 GS/s quad-channel digital storage scope.
Key Specifications
- please add
Pictures
TDS794D
TDS794 Probe
-
P6339A
-
P6339A
-
P6339A Open
-
P6339A Analog board top view
-
P6339A Analog board bottom view
-
P6339A logic board
Replacing the HDD
In case of a malfunction, the original hard disk can be exchanged for a Compact Flash card. Make sure that the replacement card supports the ability to be used as a "fixed disk". Usually these are called "industrial grade" cards. "Consumer grade" CF cards are usually detected as "removable drives" and won't work in the scope. Since the scope supports FAT16, the maximum partition size is roughly 4GB.
-
Inner board with installed HDD option
-
Hard disk drive with mounting brackets
-
Top view of HDD
-
Bottom view with HDD
-
Example of a consumer grade and a industrial grade CF card. Also shown are two CF-PATA to 2.5" IDE adapters.
-
Comparison of CF card and original HDD
Replacing the FDD with a USB drive
The internal FDD drive can be replaced with a GOTEK Floppy Emulator. The conversion is described on the TDS420 page.
-
TDS794D with installed GOTEK Floppy emulator