Я4С-97: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
{{Plugin Sidebar | {{Plugin Sidebar | ||
|manufacturer=Vilnius Research | |||
summary=Digital multimeter | | |series=Soviet 7000-series clones | ||
image=Я4С-97_front.jpg | | |type=Я4С-97 | ||
caption=Я4С-97 front panel | |summary=Digital multimeter | ||
|image=Я4С-97_front.jpg | |||
introduced=(?) | | |caption=Я4С-97 front panel | ||
discontinued=(?) | | |introduced=(?) | ||
manuals= | |discontinued=(?) | ||
|designers= | |||
|manuals= | |||
* to be added | * to be added | ||
}} | }} |
Revision as of 09:41, 15 August 2021
The Я4С-97 is a digital multimeter plug-in for Soviet 7000-series clones. It is roughly analogous to the Tek 7D13.
Significant differences to the 7D13 include:
- 2 kV and 20 kV ranges using an external 100:1 probe
- mode and range switches are separate
- probe connector is a Soviet 8-pin rectangular type
- all modes except current need a special probe
Key Specifications
Voltage ranges | 2 V, 20 V, 200 V, 2 kV, 20 kV |
---|---|
Current ranges | 2 mA, 20 mA, 200 mA, 2 A |
Resistance ranges | 200 Ω, 2 kΩ, 20 kΩ, 200 kΩ, 2 MΩ |
Temperature range | -40 to 120 °C |
The internal architecture of the Я4С-97 seems to be very similar to the 7D13, even down to the 2 kHz clock and the transistor-based temperature sensor (which uses a transistor type 2T3316-1 as the probe). However, there is no DAC included for the readout, because the mainframe readout interface is digital, not analogue.
Links
Pictures
-
Front
-
Three-quarter view
-
Analogue board
-
Switch wiring detail
-
Temperature readout
-
Voltage and resistance probe
-
EHT probe (2kV and 20kV)
-
Temperature probe
-
Replacement temperature sensor
-
Probe connector
-
Probe plugged in