015-0058-01: Difference between revisions
mNo edit summary |
(added title, more complete descriptions (removed from 134 page), added photo) |
||
| Line 1: | Line 1: | ||
'''Power Supplies for the Type 134 Current Probe Amplifier''' | |||
The '''Tektronix 015-0058-00''' is the early 115 V<sub>AC</sub> power supply version for the Tektronix [[134]]. It has a standard NEMA 5-15 AC power plug built onto the body of the power supply. | The '''Tektronix 015-0058-00''' is the early 115 V<sub>AC</sub> power supply version for the Tektronix [[134]]. It has a standard NEMA 5-15 AC power plug built onto the body of the power supply. | ||
| Line 7: | Line 9: | ||
The '''Tektronix 015-0059-01''' is the later 230 V<sub>AC</sub> version of this power supply. It differs from the 015-0059-00 in that it has a ~1 m AC power cord, an extended section of the housing to accommodate the power cord and strain relief, and a different part number on the plastic housing. | The '''Tektronix 015-0059-01''' is the later 230 V<sub>AC</sub> version of this power supply. It differs from the 015-0059-00 in that it has a ~1 m AC power cord, an extended section of the housing to accommodate the power cord and strain relief, and a different part number on the plastic housing. | ||
Each version provides an unfiltered full wave rectified 20-25 V<sub>DC</sub> output to the [[134]] amplifier. That output is filtered and regulated down to ~14 V in the amplifier. They work from 50 to 400 Hz and 103.5 to 126.5 V<sub>AC</sub>, or 201 to 253 V<sub>AC</sub> for the 230 V versions. The output is via a proprietary coaxial Tektronix connector | The latest version ''(please add)'' of the Type [[134]] power supply appears to be a Tektronix branded wall wart with an AC line cord and output to an inline connector. | ||
Each version provides an unfiltered full wave rectified 20-25 V<sub>DC</sub> output to the [[134]] amplifier. The negative side is held near ground by a pair of anti-parallel diodes and the center conductor of the output connector is positive. That output is filtered and regulated down to ~14 V in the amplifier. They work from 50 to 400 Hz and 103.5 to 126.5 V<sub>AC</sub>, or 201 to 253 V<sub>AC</sub> for the 230 V versions. The output is via a proprietary coaxial Tektronix connector. | |||
The early versions resemble the '''Tektronix [[131]]''' | The early versions resemble the '''Tektronix [[131]]''' [[015-027 | power supplies ]], with the built-in AC power plug, and all the output connectors are the same, but the [[015-027 | 131 power supplies ]] and [[134]] power supplies are not interchangeable, due to the difference in grounding. | ||
==Pictures== | ==Pictures== | ||
| Line 17: | Line 21: | ||
015-0058-01 corded.JPG | Late Power Supply w/cord and plug. Note broken output connector | 015-0058-01 corded.JPG | Late Power Supply w/cord and plug. Note broken output connector | ||
015-0058-01 output.JPG | Intact Output Connector | 015-0058-01 output.JPG | Intact Output Connector | ||
015-0058-01.later.jpg | later version, thinner cord, sleeve w/conductor labels | |||
</gallery> | </gallery> | ||
[[Category:Accessory power supplies]] | [[Category:Accessory power supplies]] | ||
Revision as of 11:02, 3 April 2023
Power Supplies for the Type 134 Current Probe Amplifier
The Tektronix 015-0058-00 is the early 115 VAC power supply version for the Tektronix 134. It has a standard NEMA 5-15 AC power plug built onto the body of the power supply.
The Tektronix 015-0059-00 is the early 230 VAC power supply version for the Tektronix 134. It is identical to the 115 VAC version except for the cover, which has a different part number and voltage rating printed on it, and the addition of dropping resistors (2 kΩ & 2.7 kΩ, both 3 W) in series with the transformer primary. Oddly, this 230 VAC version appears to use a NEMA 5-15 115 VAC cord and plug. The addition of the two series resistors allows it to work from 207 to 253 VAC.
The Tektronix 015-0058-01 is the later 115 VAC version of the power supply for the Tektronix 134 Current Probe Amplifier. It differs from the 015-0058-00 in that it has a ~1 m AC power cord, an extended section of the housing to accommodate the power cord and strain relief, and a different part number on the plastic housing.
The Tektronix 015-0059-01 is the later 230 VAC version of this power supply. It differs from the 015-0059-00 in that it has a ~1 m AC power cord, an extended section of the housing to accommodate the power cord and strain relief, and a different part number on the plastic housing.
The latest version (please add) of the Type 134 power supply appears to be a Tektronix branded wall wart with an AC line cord and output to an inline connector.
Each version provides an unfiltered full wave rectified 20-25 VDC output to the 134 amplifier. The negative side is held near ground by a pair of anti-parallel diodes and the center conductor of the output connector is positive. That output is filtered and regulated down to ~14 V in the amplifier. They work from 50 to 400 Hz and 103.5 to 126.5 VAC, or 201 to 253 VAC for the 230 V versions. The output is via a proprietary coaxial Tektronix connector.
The early versions resemble the Tektronix 131 power supplies , with the built-in AC power plug, and all the output connectors are the same, but the 131 power supplies and 134 power supplies are not interchangeable, due to the difference in grounding.
Pictures
-
Early Style, Left Side w/integral plug, assembled from parts, note wrong part number
-
Early Style, Right Side w/integral plug
-
Late Power Supply w/cord and plug. Note broken output connector
-
Intact Output Connector
-
later version, thinner cord, sleeve w/conductor labels
