015-0058-01: Difference between revisions
(add wall wart photo) |
No edit summary |
||
Line 8: | Line 8: | ||
The '''Tektronix 015-0059-01''' is the later 230 V<sub>AC</sub> version of this power supply. It differs from the 015-0059-00 in that it has a ~1 m AC power cord, an extended section of the housing to accommodate the power cord and strain relief, and a different part number on the plastic housing. | The '''Tektronix 015-0059-01''' is the later 230 V<sub>AC</sub> version of this power supply. It differs from the 015-0059-00 in that it has a ~1 m AC power cord, an extended section of the housing to accommodate the power cord and strain relief, and a different part number on the plastic housing. | ||
The '''Tektronix 013-0050-00''' battery adaptor, allows the Type [[134]] to be powered from any 22.5 V battery capable of delivering 70 mA. Note that, due to the complete absence of ground connections, this accessory could also be used for the Type [[131]. | |||
The latest version ''(please add)'' of the Type [[134]] power supply appears to be a Tektronix branded wall wart with an AC line cord and output to an inline connector. | The latest version ''(please add)'' of the Type [[134]] power supply appears to be a Tektronix branded wall wart with an AC line cord and output to an inline connector. |
Revision as of 07:18, 4 April 2023
Power Supplies for the Tektronix Type 134 Current Probe Amplifier
The Tektronix 015-0058-00 is the early 115 VAC power supply version for the Tektronix 134. It has a standard NEMA 5-15 AC power plug built onto the body of the power supply.
The Tektronix 015-0059-00 is the early 230 VAC power supply version for the Tektronix 134. It is identical to the 115 VAC version except for the cover, which has a different part number and voltage rating printed on it, and the addition of dropping resistors (2 kΩ & 2.7 kΩ, both 3 W) in series with the transformer primary. Oddly, this 230 VAC version appears to use a NEMA 5-15 115 VAC cord and plug. The addition of the two series resistors allows it to work from 207 to 253 VAC.
The Tektronix 015-0058-01 is the later 115 VAC version of the power supply for the Tektronix 134 Current Probe Amplifier. It differs from the 015-0058-00 in that it has a ~1 m AC power cord, an extended section of the housing to accommodate the power cord and strain relief, and a different part number on the plastic housing.
The Tektronix 015-0059-01 is the later 230 VAC version of this power supply. It differs from the 015-0059-00 in that it has a ~1 m AC power cord, an extended section of the housing to accommodate the power cord and strain relief, and a different part number on the plastic housing.
The Tektronix 013-0050-00 battery adaptor, allows the Type 134 to be powered from any 22.5 V battery capable of delivering 70 mA. Note that, due to the complete absence of ground connections, this accessory could also be used for the Type [[131].
The latest version (please add) of the Type 134 power supply appears to be a Tektronix branded wall wart with an AC line cord and output to an inline connector.
Each version provides an unfiltered full wave rectified 20-25 VDC output to the 134 amplifier. The negative side is held near ground by a pair of anti-parallel diodes and the center conductor of the output connector is positive. That output is filtered and regulated down to ~14 V in the amplifier. They work from 50 to 400 Hz and 103.5 to 126.5 VAC, or 201 to 253 VAC for the 230 V versions. The output is via a proprietary coaxial Tektronix connector.
The early versions resemble the Tektronix 131 power supplies , with the built-in AC power plug, and all the output connectors are the same, but the 131 power supplies and 134 power supplies are not interchangeable, due to the difference in grounding.
Pictures
-
Early Style, Left Side w/integral plug, assembled from parts, note wrong part number
-
Early Style, Right Side w/integral plug
-
Late Power Supply w/cord and plug. Note broken output connector
-
Intact Output Connector
-
later version, thinner cord, sleeve w/conductor labels
-
latest version with wall wart PS