067-1436-00: Difference between revisions
Jump to navigation
Jump to search
Jaredcabot (talk | contribs) (Fixed sidebar) |
Jaredcabot (talk | contribs) (small description corrections) |
||
| Line 14: | Line 14: | ||
}} | }} | ||
The 067-1436-00 Communications Pod was used between a PC and a TAS400, TDS300 or [[THS-series_oscilloscopes|THS700]] series oscilloscopes to download firmware to the instrument. It uses both a serial port and GPIB at the same time along with specific PC software.<br> | The 067-1436-00 Communications Pod was used between a PC and a TAS400, TDS300 or [[THS-series_oscilloscopes|THS700]] series oscilloscopes to download firmware to the instrument. It uses both a serial port and GPIB at the same time along with specific PC software.<br> | ||
The ribbon cable connects directly to the | The ribbon cable connects directly to the CPU board on TAS400 and main board on TDS300 series scopes, while THS700 series scopes used an adapter cable to connect to the socket on its mainboard. | ||
The green RJ45 connector on top seen in the pictures is not original. | The green RJ45 connector on top seen in the pictures is not original. | ||
Revision as of 02:33, 4 October 2023
The 067-1436-00 Communications Pod was used between a PC and a TAS400, TDS300 or THS700 series oscilloscopes to download firmware to the instrument. It uses both a serial port and GPIB at the same time along with specific PC software.
The ribbon cable connects directly to the CPU board on TAS400 and main board on TDS300 series scopes, while THS700 series scopes used an adapter cable to connect to the socket on its mainboard.
The green RJ45 connector on top seen in the pictures is not original.
Software
Pictures
-
-
-
-
-
THS700 Adapter Cable
-
THS700 Adapter Cable
