WP1000AF: Difference between revisions

From TekWiki
Jump to navigation Jump to search
(Minor changes & corrections)
(Added some more details, some corrections)
Line 21: Line 21:
! Count
! Count
! NSN Number
! NSN Number
! Tek Name
! Tek Name/Parts
! Description
! Description
|-
|-
Line 41: Line 41:
| 1
| 1
|  
|  
| 33-A1-13-484-1
|  
| Documentation
| Documentation
|-
|-
Line 47: Line 47:
| 5305-01-076-3151
| 5305-01-076-3151
| 213-0054-00
| 213-0054-00
| Screw
| Screw, 6-32,5/16,PAN
|}
 
===Mainframe===
 
The 7704A Mod 515C adds the ability to remotely operate the vertical, horizontal and triggering modes of the mainframe. Additional connectors on the rear are directly connected to the plugin-compartments to allow remote operations for the plugins.
 
Pinout of the remote connector for the Mainframe
 
{| class="wikitable"
|-
! Pin
! Function
! Input Type
! Range
! Description
|-
| Coax #1
| n.C.
|
|
|
|-
| Coax #2
| n.C.
|
|
|
|-
| Coax #3
| n.C.
|
|
|
|-
| Single #1
| Device Code
| open or GND
|
| GND
|-
| Single #2
| Device Code
| open or GND
|
| GND
|-
| Single #3
| Device Code
| open or GND
|
| GND
|-
| Single #4
| Device Code
| open or GND
|
| GND
|-
| Single #5
| Device Code
| open or GND
|
| #5 Open => Mainframe
|-
| Coax #4
| Remote Control
| 8-Bit serial
| TTL-Compatible
| Bit 6+7+8: Vert mode, Bit 6+5: B Trigger, Bit 4+3: A trigger, Bit 2+1: Horz mode
|-
|}
|}


===Pictures===


====Mainframe====


<gallery>
<gallery>
Line 82: Line 150:
</gallery>
</gallery>


====P7001====
===P7001===


The only modification to the P7001 was done on the z-axis/front panel pcb. A switch allowed to change to a longer timeout period for the external computer.
The only modification to the P7001 was done on the z-axis/front panel pcb. A switch allowed to change to a longer timeout period for the external computer.
Line 91: Line 159:
</gallery>
</gallery>


====7A16A MOD515D Plugin====
===7A16A MOD515D Plugin===
 
The 7A16A Mod 515D adds the ability to remotely operate the Bandwith, Polarity and Position functions of the plugin.
 
Pinout of the remote connectors for the vertical plugins
 
{| class="wikitable"
|-
! Pin
! Function
! Input Type
! Range
! Description
|-
| Coax #1
| Polarity
| Digital
| 0 or 5V, TTL compatible
| +5V => +Up, 0V => invert, open => +Up
|-
| Coax #2
| Bandwith
| Digital
| 0 or 5V, TTL compatible
| +5V => Full, 0V => 20MHz, open => Full
|-
| Coax #3
| Position
| Analog
| 0...5V
| +5V => max upward, 0V => max downward, open => center
|-
| Single #1
| Device Code
| open or GND
|
| #1 Open => left vertical plugin
|-
| Single #2
| Device Code
| open or GND
|
| #2 Open => right vertical plugin
|-
| Single #3
| Device Code
| open or GND
|
| GND
|-
| Single #4
| Device Code
| open or GND
|
| GND
|-
| Single #5
| Device Code
| open or GND
|
| GND
|-
| Coax #4
| n.C.
|
|
|
|-
|}


<gallery>
<gallery>
Line 101: Line 237:
</gallery>
</gallery>


====7B71 MOD515C Plugin====
===7B71 MOD515C Plugin===
 
The 7B71 Mod 515V adds the ability to remotely operate the triggering level, the position & delay time, the magnifier setting and the trigger-modes.
The modifed timebase can be configured as a delaying or as a delayed timebase.
 
 
Pinout of the remote connectors for the horizontal plugins


The 7B71 timebase with MOD515C can be configured as a delaying or as a delayed timebase.
{| class="wikitable"
|-
! Pin
! Function
! Input Type
! Range
! Description
|-
| Coax #1
| Trigger Level
| Analog
| 0...5V
| +5V => max, 0V => min, open => center
|-
| Coax #2
| Delay Time Mult.
| Analog
| 0...5V
| +5V => max, 0V => min, open => center
|-
| Coax #3
| Position
| Analog
| 0...5V
| +5V => max, 0V => min, open => center
|-
| Single #1
| Device Code
| open or GND
|
| GND
|-
| Single #2
| Device Code
| open or GND
|
| GND
|-
| Single #3
| Device Code
| open or GND
|
| #3 Open => A horizontal plugin
|-
| Single #2
| Device Code
| open or GND
|
| #4 Open => B horizontal plugin
|-
| Single #5
| Device Code
| open or GND
|
| GND
|-
| Coax #4
| Trigger & Mag.
| 8-Bit serial
| TTL-Compatible
| Bit 8: Mag, Bit 7: Trig Slope, Bit 6+5: Trig Coupl., Bit 4+3: Trig Mode, Bit 2+1: Trig Source
|-
|}


<gallery>
<gallery>

Revision as of 21:59, 3 July 2024

Tektronix WP1000AF
Signal processing system

Produced from (?) to (?)

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix WP1000AF Digial Processing Oscilloscope System is a bundle of a DPO, two 7A16A and two 7B71 plugins. All components have additional modifications, which allows an external computer to control some of the front panel settings. The National Stock Number (NSN) for this bundle is 6625-01-034-4833.

Details of the configuration

Count NSN Number Tek Name/Parts Description
1 7021-01-038-5028 P7001 + D7704 + A7704 MOD515C
2 6625-01-037-0091 7A16A MOD515D
2 7B71 MOD515C
1 Documentation
5305-01-076-3151 213-0054-00 Screw, 6-32,5/16,PAN

Mainframe

The 7704A Mod 515C adds the ability to remotely operate the vertical, horizontal and triggering modes of the mainframe. Additional connectors on the rear are directly connected to the plugin-compartments to allow remote operations for the plugins.

Pinout of the remote connector for the Mainframe

Pin Function Input Type Range Description
Coax #1 n.C.
Coax #2 n.C.
Coax #3 n.C.
Single #1 Device Code open or GND GND
Single #2 Device Code open or GND GND
Single #3 Device Code open or GND GND
Single #4 Device Code open or GND GND
Single #5 Device Code open or GND #5 Open => Mainframe
Coax #4 Remote Control 8-Bit serial TTL-Compatible Bit 6+7+8: Vert mode, Bit 6+5: B Trigger, Bit 4+3: A trigger, Bit 2+1: Horz mode


  • Front view of the system. The Mainframe and the plugins have remote/local switches

    Front view of the system. The Mainframe and the plugins have remote/local switches

  • Tag indicating the modification

    Tag indicating the modification

  • Remote/local switch on the lower section of the DPO

    Remote/local switch on the lower section of the DPO

  • Tag added by Honeywell - indicates the later usage of this specific mainframe

    Tag added by Honeywell - indicates the later usage of this specific mainframe

  • The additional connectors for remote control

    The additional connectors for remote control

  • The additional connectors for remote control (rear view)

    The additional connectors for remote control (rear view)

  • Replacements for the remote control connectors are still available in 2024

    Replacements for the remote control connectors are still available in 2024

  • The MOD515C needs a permanent 5V supply. The switch to turn off the control illumination was removed

    The MOD515C needs a permanent 5V supply. The switch to turn off the control illumination was removed

  • Additional connector board on the power supply

    Additional connector board on the power supply

  • Most boards of the MOD515C modification

    Most boards of the MOD515C modification

  • Overview on the additional boards in the lower section of the mainframe

    Overview on the additional boards in the lower section of the mainframe

  • The modified mode switches.

    The modified mode switches.

  • MOD515C horizontal mode switch assembly. The lights work independently from the switches.

    MOD515C horizontal mode switch assembly. The lights work independently from the switches.

  • MOD515C horizontal mode switch assembly. The lights work independently from the switches.

    MOD515C horizontal mode switch assembly. The lights work independently from the switches.

  • MOD515C vertical mode switch assembly. The lights work independently from the switches.

    MOD515C vertical mode switch assembly. The lights work independently from the switches.

  • MOD515C vertical mode switch assembly. The lights work independently from the switches.

    MOD515C vertical mode switch assembly. The lights work independently from the switches.

  • The main logic board of the MOD515C

    The main logic board of the MOD515C

  • The main logic board of the MOD515C

    The main logic board of the MOD515C

  • The main logic board of the MOD515C

    The main logic board of the MOD515C

  • The serial receiver board

    The serial receiver board

  • The serial receiver board

    The serial receiver board

  • The serial receiver board

    The serial receiver board

  • The MOD515C calibrator board

    The MOD515C calibrator board

  • Additional coax connectors of the plugin interfaces

    Additional coax connectors of the plugin interfaces

  • Additional coax connectors of the plugin interfaces

    Additional coax connectors of the plugin interfaces

P7001

The only modification to the P7001 was done on the z-axis/front panel pcb. A switch allowed to change to a longer timeout period for the external computer.

  • Z-Axis/Frontpanel pcb with additional switch and timing resistor

    Z-Axis/Frontpanel pcb with additional switch and timing resistor

  • Z-Axis/Frontpanel pcb with additional switch and timing resistor

    Z-Axis/Frontpanel pcb with additional switch and timing resistor

7A16A MOD515D Plugin

The 7A16A Mod 515D adds the ability to remotely operate the Bandwith, Polarity and Position functions of the plugin.

Pinout of the remote connectors for the vertical plugins

Pin Function Input Type Range Description
Coax #1 Polarity Digital 0 or 5V, TTL compatible +5V => +Up, 0V => invert, open => +Up
Coax #2 Bandwith Digital 0 or 5V, TTL compatible +5V => Full, 0V => 20MHz, open => Full
Coax #3 Position Analog 0...5V +5V => max upward, 0V => max downward, open => center
Single #1 Device Code open or GND #1 Open => left vertical plugin
Single #2 Device Code open or GND #2 Open => right vertical plugin
Single #3 Device Code open or GND GND
Single #4 Device Code open or GND GND
Single #5 Device Code open or GND GND
Coax #4 n.C.
  • Front view of a 7A16A plugin with MOD515D

    Front view of a 7A16A plugin with MOD515D

  • Left side

    Left side

  • Right side

    Right side

  • Top side

    Top side

  • Closeup of serial number and MOD515D sticker

    Closeup of serial number and MOD515D sticker

7B71 MOD515C Plugin

The 7B71 Mod 515V adds the ability to remotely operate the triggering level, the position & delay time, the magnifier setting and the trigger-modes. The modifed timebase can be configured as a delaying or as a delayed timebase.


Pinout of the remote connectors for the horizontal plugins

Pin Function Input Type Range Description
Coax #1 Trigger Level Analog 0...5V +5V => max, 0V => min, open => center
Coax #2 Delay Time Mult. Analog 0...5V +5V => max, 0V => min, open => center
Coax #3 Position Analog 0...5V +5V => max, 0V => min, open => center
Single #1 Device Code open or GND GND
Single #2 Device Code open or GND GND
Single #3 Device Code open or GND #3 Open => A horizontal plugin
Single #2 Device Code open or GND #4 Open => B horizontal plugin
Single #5 Device Code open or GND GND
Coax #4 Trigger & Mag. 8-Bit serial TTL-Compatible Bit 8: Mag, Bit 7: Trig Slope, Bit 6+5: Trig Coupl., Bit 4+3: Trig Mode, Bit 2+1: Trig Source
  • Front view of a 7B71 plugin with MOD515C

    Front view of a 7B71 plugin with MOD515C

  • Left side

    Left side

  • Right side

    Right side

  • Top side

    Top side

  • Closeup of serial number and MOD515C sticker

    Closeup of serial number and MOD515C sticker


Further modifications by Honeywell

Honeywell replaced the feet of the unit shown on this page. They also added a cable tie holder and a tag to the back of the unit. The result got the Honeywell part-number 10066273-101 and the NSN number 6625-01-060-4390.

NSN Number Component part number Description Manufacturer
5365-01-053-8742 10057922-101 SPACER,PLATE Honeywell
5365-01-052-9612 10057922-102 SPACER,PLATE Honeywell
6625-01-034-4833 WP1000AF Oscilloscope Tektronix
TY24M Cable tie Thomas & Betts
TC5342A Cable tie holder Thomas & Betts
MS24693C50 Screw Military Standards
33A1-13-484-1 Documentation Tektronix
10063681-222 Honeywell
5310-01-082-3879 10057921-102 Nut Honeywell


  • Replaced foot

    Replaced foot

  • Replaced foot

    Replaced foot

  • Replaced foot

    Replaced foot

  • Tag added by Honeywell - indicates the later usage of this mainframe

    Tag added by Honeywell - indicates the later usage of this mainframe

Retrieved from "https://w140.com/tekwiki/index.php?title=WP1000AF&oldid=95176"