PS503
The Tektronix PS503 is a triple power supply plug-in for the TM500 system.
It supplies 0 to −20 V and 0 to +20 V at 0.4 A as well as +5 V at 1 A, and was introduced in 1972.
The PS503A version (introduced in 1976) delivers ±20 V at 1 A when used in TM500 high-power compartments.
The variable supplies can be adjusted independently or can track one another, and are floating. The 5 V output is ground referenced.
Key Specifications
| Output voltage | 0 to +20 V and 0 to −20 V, floating; 5 V ±5%, ground referenced |
|---|---|
| Current limit | <100 mA to >1 A variable (0.4 A for original PS503 or if used in low power compartment); 1 A fixed on +5 V |
| Ripple and noise | <3 mVp-p @ 1 A on either rail |
Rear interface connections
- +20 V output (22A)
- −20 V output (22B)
- ±20 V common (24A, 24B)
(connections below require various jumper changes in the PS503 as described in the manual)
- Remote resistor or voltage programming (via 25A, 25B) or
- Remote sensing (+ Sense 23A, − Sense 23B)
Links
- Tektronix PS503A Power Supply Restoration by NFM @ YouTube
Pictures
PS503
-
PS503 Front Panel
-
PS503 Left Internal
-
PS503 Right Internal
PS503M
-
PS503M Front Panel
-
PS503M Left Internal
-
PS503M Right Internal
PS503A
-
PS503A Front Panel
-
PS503A Left Internal
-
PS503A Right Internal
-
Switch S95 in rear of PS503A (detects high power compartment)
-
PS503A Front Panel
-
PS503A Left Internal
-
PS503A Right Internal
-
PS503A Side
-
PS503A Rear connector
