067-1436-00

Tektronix 067-1436-00
Calibration fixture Communication Pod Produced from (?) to (?) Manuals Tektronix Communication Pod Instruction Manual 070-8760-02 (All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix 067-1436-00 Communications Pod was used between a PC and a TAS400, TDS300, TWD120, or THS700 series oscilloscopes to download firmware to the instrument. It uses both a serial port and GPIB at the same time along with specific PC software.

The ribbon cable connects directly to the CPU board on TAS400 and main board on TDS300 series scopes, while THS700 series scopes used an adapter cable to connect to the socket on its mainboard.

The Pod uses a Motorola M68332BCCDI 'DIBUG' debug module which contains a M68HC11 MCU and RS-232C serial communications, which is mounted on a Tek designed mainboard.
This module was originally intended for use with the Motorola 'M68332BCC' (Business Card Computer) and was commonly used on the 'M68332EVS' development board.

The green RJ45 connector on top seen in the pictures is not original.