106

The Tektronix Type 106 is a squarewave generator introduced in 1966. It has four outputs:

• Fast Rise +Output: 500mV into 50 ohm load, positive-going pulse, 1ns risetime, 50-ohm output impedance, GR connector
• Fast Rise -Output: 500mV into 50 ohm load, negative-going pulse, 1ns risetime, 50-ohm output impedance, GR connector
• High Amplitude Output: 12V into 50 ohm load, 12ns-risetime, 600-ohm output impedance, GR connector
• Trigger Output: 100mV into 50 ohm load, 50ns risetime, 150 ohm output impedance, BNC connector

The 1ns-risetime outputs are generated using diodes to clip a high amplitude signal. In units with serial numbers less than 1190, GaAs diodes were used for clipping. After serial number 1190, silicon diodes were used.

• Tektronix 106 Manual (PDF)
• Tektronix 106 Manual (DjVu)

• 

  Front

• 

  Rear

• 

  Schematic