TDS654C

Tektronix TDS654C

500 MHz, 5 GS/s 4-ch digital scope

Produced from 1995 to (?)

Manuals

(All manuals in PDF format unless noted otherwise)

The Tektronix TDS654C is a 500 MHz, 5 GS/s quad-channel digital storage scope.

Key Specifications

	— Acquisition —
Sampling rate	5 GS/s on each channel simultaneously
Analog bandwidth	500 MHz
Inputs	4 Channels
Resolution	8 bit
Record length	15K samples per channel
Modes	sample, envelope, average
	— Misc —
Display	Color; Zoom
Trigger modes	Edge, logic, pulse; Video trigger with option 05 (NTSC, SECAM, PAL, HDTV, and FlexFormat)
Storage	1.44 Mbyte, 3.5 inch, DOS 3.3-or-later floppy disk. NVRAM storage for saving waveforms, hardcopies, and setups.
I/O	Full GPIB programmability
Hardcopy output	using GPIB, RS-232, or Centronics ports

05 - Video Trigger - Oscilloscope comes with tools that allow investigation of a range of NTSC, PAL, SECAM, and high definition TV signals.
13 - RS-232C and Centronics hardcopy interfaces - Add RS-232-C and Centronics interface ports.
1F - Floppy disk drive - Add 3.5 inch, 1.44 MByte floppy disc drive.
1M - 4M acquisition length - Extends standard acquisition length from 50,000 points per channel to 130,000 samples on three or four channels, 250,000 samples on two channels, and 500,000 samples on one channel.
2F - Advanced DSP math - Add advanced DSP math features such as FFT, integration, and differentiation.
2M - 8M acquisition length - TDS 520D, 724D: To 2M samples on two channels and 4M on one channel. TDS 540D, 580D, 714L, 754D, 784D, 794D: To 2M samples on three or four channels, 4M on two channels, and 8M samples on one channel (Option includes a hard disk and is only available for the models listed above.)
HD - Hard Disk - 170Mb internal hard disk drive.