GR-874 connector

General Radio 874 (GR-874) connectors are hermaphroditic (asexual) coaxial RF connectors developed by General Radio in the late 1940s, initially for applications up to "4500 Mc" (4.5 GHz).

GR-874 connectors are carefully engineered to keep a constant impedance throughout the signal path, by varying connector diameters between free-air and dielectrically supported sections. These connectors therefore exhibit very little reflection and are well suited for gigahertz and pulse applications.

They are typically for 50 Ω impedance. Versions for 75 Ω and 125 Ω were also available using the same ground shield and housing, but different (thinner) center pin geometry. The Tektronix 519 uses the 125 Ω GR-874 variant.

The regular 50 Ω version is used in the 1S1, 1S2, 3S1, 3S7, 3T7, 4S1, 4S2, 5T1, 5T1A, 5T3, 7M11, N, S-1, S-2, 106, 109, 110, 113, 191, 280, 281, 282, P6051, 017-0088-00 and possibly others.

Different versions of the connector have different maximum voltage ratings; 1000 V is typical. There are locking and non-locking versions.

By the 1970s, GR-874 connectors were being supplanted by SMA connectors in test equipment, see e.g. the progression from the S-1 to the S-4 sampling heads.

GR-874 connectors continue to be available through IET Labs and Max-Gain Systems.