TDS1012

The Tektronix TDS1012 is a dual-channel, 100 MHz, 1 GS/s digital scope with a monochrome LCD screen.

{{{manufacturer}}}

Digital Storage 100 MHz 2-channel scope

Produced from 2005 to ?

Manuals

TDS1000 and TDS2000 Series user manual (1.2 MB, PDF, OCR)
071-1064-00 TDS1000 and TDS2000-Series User Manual Revision A (10.32 MB PDF)
071-1076-02 TDS1000 and TDS2000-Series Service _Manual (8.032 MB PDF)
077-0444-01 TDS1000, & TDS2000-Series Programmer Manual (15.25 MB PDF)
03GW 15314 6 TDS1000 and TDS2000 Series Oscilloscopes Datasheet (666 KB PDF)
TDS1000 AND TDS2000 SERIES FIRMWARE UPDATE (786 B TXT)

(All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

Key Specifications

{{Spec | Acquisition Modes| Peak Detect, Sample, Average, Single Sequence }

Display (1/4 VGA LCD)	Mono
Bandwidth	100 MHz; Bandwidth is 20 MHz at 2 mV/div
Channels	2
Ext Trigger Input	Present
Sample Rate on each channel	1.0 GS/s
Record Length	2.5 K points
Vertical Resolution	8-bits
Vertical Sensitivity	2 mV to 5 V/div with calibrated fine adjustment
DC Vertical Accuracy	±3%
Vertical Zoom	Vertical expand or compress a live or stopped waveform
Max Imput Voltage	300 VRMS CAT II; derated at 20 dB/decade above 100 kHz to 13 Vp-p AC at 3 MHz and above
Position Range	2 mV to 200 mV/div ±2 V; >200 mV to 5 V/div ±50 V
BW Limit	20 MHz
Input Coupling	AC, DC, GND
Input Impedance	1 MΩ in parallel with 20 pF
Time Base Range	5 ns to 50 s/div
Time Base Accuracy	50 ppm
Horizontal Zoom	Horizontal expand or compress a live or stopped waveform
Trigger Types	Edge (rising or falling), Video (NTSC, PAL, SECAM), Pulse Width (or Glitch)
Trigger Modes	Auto, Normal, Single Sequence
Trigger Source	CH1, CH2, Ext, Ext/5, AC Line
Trigger View	Displays trigger signal while trigger view button is depressed
Trigger Signal Frequency Readout	Provides a frequency readout of the trigger source
Cursors	Time, Voltage, Measurements: [Δ]T, 1/[Δ]T (frequency), [Δ]V
Automatic Waveform Measurements	Period, Frequency, +Width, -Width, Rise Time, Fall Time, Max, Min, Peak-to-Peak, Mean, Cycle RMS
Waveform Processing	Operators (Add, Subtract, FFT); FFT (Windows: Hanning, Flat Top, Rectangular; 2048 sample points; Autoset Menu (Single-button, automatic setup of all channels for vertical, horizontal, and trigger systems with undo autoset)
Autoset Menu	Square Wave (Single-cycle, Multi-cycle, Rising or Falling Edge); Sine Wave (Single-cycle, Multi-cycle, FFT Spectrum); Video (NTSC, PAL, SECAM) Field: All, Odd or Even Line:All or Selective Line Number
Interface	Centronics type parallel, RS-232, GPIB, Compact Flash Memory
Probes	Two P2220 200 MHz ×10 to x1 probes BNC connector