32,978
edits
11000 Series plug-in interface: Difference between revisions
no edit summary
No edit summary |
No edit summary |
||
| Line 40: | Line 40: | ||
As a matter of trivia, if one were to call the 11300's RIGHT slot a "horizontal" slot, | As a matter of trivia, if one were to call the 11300's RIGHT slot a "horizontal" slot, | ||
then the 11300-series scopes might be the only Tek scopes that offer a timebase as a built-in part of the mainframe and also | then the 11300-series scopes might be the only Tek scopes that offer a timebase | ||
an easily swappable module (i.e., a plug-in). | as a built-in part of the mainframe and also an easily swappable module (i.e., a plug-in). | ||
==The RIGHT Slot on 11400 and DSA600 Scopes== | |||
In 11400 and DSA600 scopes, the trigger output from the LEFT and CENTER plug-ins | |||
are routed to the RIGHT plug-in's auxiliary trigger inputs. | |||
They are the same as the 11300 scopes in this regard. | |||
However, 11400 and DSA600 scopes have a three-input channel switch, in contrast to the 11300's two-input channel switch. | |||
Therefore, 11400 and DSA600 scopes can use the signal output from any of the three plug-in compartments | |||
as input to the digitizer, and as the vertical signal. | |||
==Digital Communication Between the 11000-Series Plug-in and the 11000-Series Mainframe== | ==Digital Communication Between the 11000-Series Plug-in and the 11000-Series Mainframe== | ||
| Line 47: | Line 55: | ||
The pins that are used for readout in the 7000-series are not used in the 11000 Series. | The pins that are used for readout in the 7000-series are not used in the 11000 Series. | ||
In the 11000 Series architecture, the mainframe communicates with the plug-in over a serial digital link called SDI. | In the 11000 Series architecture, the mainframe communicates with the plug-in over a serial digital link called [[SDI|Serial Digital Interface (SDI)]]. | ||
SDI uses pins A20, A21, and B21 on the plug-in connector. | SDI uses pins A20, A21, and B21 on the plug-in connector. | ||
Those pins were not used on vertical plugins in the 7000-series interface | Those pins were not used on vertical plugins in the 7000-series interface. | ||
==Calibration Voltage== | ==Calibration Voltage== | ||