2715: Difference between revisions

2715 (view source)

80 bytes added , 23 October 2021

no edit summary

12

edits

@@ Line 26: / Line 26: @@
 Front panel inputs/outputs are: RF INPUT [[BNC connector]] (75Ω, +20 dBm Max, 100 V DC blocking capacitor); and OPTION [[Unknown connector]] (Service manual only indicates that the front panel position is for a '''Future Option'''.  No internal tracking generator was available like with the 2710, 2711, and 2712).
-Rear panel inputs/outputs are: J101 [[SMA connector]] (Female SMA installed for Opt. 15), J102 EXT TRIG [[BNC connector]] (10 kΩ, 50V (DC + peak AC)), J103 [[DB15 connector]] Female (Not RS-232 compatible).  Accessory connector: Pin 1 Video Input, Pin 2 Ground, Pin 3 Video Output, Pin 6 Sweep Gate, Pin 7 Sweep Output, all others unused), J104 Opt. 03: [[GPIB connector]] (IEEE Std 488 connector) or Opt. 08: [[DB9 connector, RS-232 interface]] (Digital Communication Port.).
+Rear panel inputs/outputs are: J101 [[SMA connector]] Female SMA installed for Opt. 15, J102 EXT TRIG [[BNC connector]] (10 kΩ, 50V (DC + peak AC)), J103 [[DB15 female connector]] (Not RS-232 compatible) Accessory connector: Pin 1 EXTVIDEO, Pin 2 SWPGATE, Pin 3 Ground, Pin 4 SWP, Pin 5 LOGVID, Pin 6 CLK0, Pin 7 DATAI, Pin 8 DATAO, Pin 9 EXTGLATCH, Pin 10 26.38MHz, Pin 11 VLVL, Pin 12 SWPSLOPE, Pin 13, 14, 15 Unused, J104 Opt. 03: [[GPIB connector]] (IEEE Std 488 connector) or Opt. 08: [[DB9 connector, RS-232 interface]] (Digital Communication Port.).
 {{BeginSpecs}}