434

From TekWiki
Revision as of 13:13, 31 December 2011 by Kurt (talk | contribs)
Jump to navigation Jump to search

The 434 is a analog storage scope with two independent storage areas on the screen. It has a bandwith of 24 MHz and uses a tunnel diode in its trigger circuit. The storage is done in the CRT itself, by trapping charge on a special fine grid of isolated pads behind the phosphor where the electron beam is then blocked or released.

There is a chopped two channel system and the fastest sweep time is 20nS/div. An option for a tube with higher sensitivity at high writing speeds was available too.

Tek_434 analog storage scope