3L5
The Tektronix 3L5 is a 50 Hz — 1 MHz spectrum analyzer plug-in for 560-series scopes.
It is very similar to the 1L5 and can be used to measure the spectrum of signals. In conjunction with the 015-0107-00 "Swept Frequency Generator" (tracking generator), the 3L5 can also be used to make scalar frequency response measurements. A video filter switch was added to the later SNs (1971 Catalog).
75 Ω Version
There is also a 75 Ω version of the 3L5. Its input is on the rear, via a coaxial connector. A lever on the front panel switches between two frequency ranges:
- 10 kHz - 1 MHz
- 18.010 MHz - 19 MHz
Timebase Support
3L5 requires a timebase plug-in in the horizontal compartment to operate. Timebase plug-in units with serial no listed and below require modification 040-0413-00 to provide the sweep signal to the 3L5 (To pin 18 of the plug-in connector )
Time Base | SN# |
---|---|
2B67 | 15180 |
3B1 | 4040 |
3B3 | 4270 |
3B4 | 740 |
Specifications
please add
Pictures
1 MΩ version
-
1 MΩ Version
-
1 MΩ later version with Video Filter Switch
75 Ω version
-
75 Ω version of 3L5, front
-
75 Ω version, front/top
-
75 Ω version, left
-
75 Ω version, top
-
75 Ω version, bottom left
-
75 Ω version
-
75 Ω version
-
75 Ω version, back