TDS714

Tektronix TDS714L

4-ch 500 MHz, 500 MS/s digital scope

Produced from 1995? to 1998?

Manuals

(All manuals in PDF format unless noted otherwise)

The Tektronix TDS714L is a 500 MHz, 500 MS/s DSO.
The TDS714L is compatible with the Iomega Zip and Zip Plus Drive.

Key Specifications

Bandwidth	500 MHz
Sample rate	500 MS/s
Resolution	8 bit
Record length	250k samples per channel on 1 or 2 channels, 130k on 3 or 4 channels (Option 2M adds more)
Acquisition modes	sample, envelope, average, high-resolution, peak-detect
Display	Color; Zoom
Trigger modes	Edge, logic, pulse; Video trigger with option 05 (NTSC, SECAM, PAL, HDTV, and FlexFormat)
Storage	1.44 Mbyte, 3.5 inch, DOS 3.3-or-later floppy disk. NVRAM storage for saving waveforms, hardcopies, and setups. Units with option HD present (requires additional hardware) have a hard disk drive Iomega Zip and Zip Plus Drive
I/O	Full GPIB programmability
Hardcopy	Using GPIB, RS-232, or Centronics ports

05 - Video Trigger - Oscilloscope comes with tools that allow investigation of a range of NTSC, PAL, SECAM, and high definition TV signals.
13 - RS-232C and Centronics hardcopy interfaces - Add RS-232-C and Centronics interface ports.
1F - Floppy disk drive - Add 3.5 inch, 1.44 MByte floppy disc drive.
2M - 8M acquisition length - To 2M samples on three or four channels, 4M on two channels, and 8M samples on one channel.
HD - Hard Disk - 170Mb internal hard disk drive.