WP1000AF
The Tektronix WP1000AF Digial Processing Oscilloscope System is a bundle of a DPO, two 7A16A and two 7B71 plugins. All components have additional modifications, which allows an external computer to control some of the front panel settings. The National Stock Number (NSN) for this bundle is 6625-01-034-4833.
Details of the configuration
| Count | NSN Number | Tek Name | Description |
|---|---|---|---|
| 1 | 7021-01-038-5028 | P7001 + D7704 + A7704 MOD515C | |
| 2 | 6625-01-037-0091 | 7A16A MOD515D | |
| 2 | 7B71 MOD515C | ||
| 1 | 33-A1-13-484-1 | Documentation | |
| 5305-01-076-3151 | 213-0054-00 | Screw |
Pictures
Mainframe
-
Front view of the system. The Mainframe and the plugins have remote/local switches
-
Tag indicating the modification
-
Remote/local switch on the lower section of the DPO
-
Tag added by Honeywell - indicates the later usage of this specific mainframe
-
The additional connectors for remote control
-
The additional connectors for remote control (rear view)
-
Replacements for the remote control connectors are still available in 2024
-
The MOD515C needs a permanent 5V supply. The switch to turn off the control illumination was removed
-
Additional connector board on the power supply
-
Most boards of the MOD515C modification
-
Overview on the additional boards in the lower section of the mainframe
-
The modified mode switches.
-
MOD515C horizontal mode switch assembly. The lights work independently from the switches.
-
MOD515C horizontal mode switch assembly. The lights work independently from the switches.
-
MOD515C vertical mode switch assembly. The lights work independently from the switches.
-
MOD515C vertical mode switch assembly. The lights work independently from the switches.
-
The main logic board of the MOD515C
-
The main logic board of the MOD515C
-
The main logic board of the MOD515C
-
The serial receiver board
-
The serial receiver board
-
The serial receiver board
-
The MOD515C calibrator board
-
Additional coax connectors of the plugin interfaces
-
Additional coax connectors of the plugin interfaces
P7001
The only modification to the P7001 was done on the z-axis/front panel pcb. A switch allowed to change to a longer timeout period for the external computer.
-
Z-Axis/Frontpanel pcb with additional switch and timing resistor
-
Z-Axis/Frontpanel pcb with additional switch and timing resistor
7A16A MOD515D Plugin
-
Front view of a 7A16A plugin with MOD515D
-
Left side
-
Right side
-
Top side
-
Closeup of serial number and MOD515D sticker
7B71 MOD515C Plugin
The 7B71 timebase with MOD515C can be configured as a delaying or as a delayed timebase.
-
Front view of a 7B71 plugin with MOD515C
-
Left side
-
Right side
-
Top side
-
Closeup of serial number and MOD515C sticker
Further modifications by Honeywell
Honeywell replaced the feet of the unit shown on this page. They also added a cable tie holder and a tag to the back of the unit. The result got the Honeywell part-number 10066273-101 and the NSN number 6625-01-060-4390.
| NSN Number | Component part number | Description | Manufacturer |
|---|---|---|---|
| 5365-01-053-8742 | 10057922-101 | SPACER,PLATE | Honeywell |
| 5365-01-052-9612 | 10057922-102 | SPACER,PLATE | Honeywell |
| 6625-01-034-4833 | WP1000AF | Oscilloscope | Tektronix |
| TY24M | Cable tie | Thomas & Betts | |
| TC5342A | Cable tie holder | Thomas & Betts | |
| MS24693C50 | Screw | Military Standards | |
| 33A1-13-484-1 | Documentation | Tektronix | |
| 10063681-222 | Honeywell | ||
| 5310-01-082-3879 | 10057921-102 | Nut | Honeywell |
-
Replaced foot
-
Replaced foot
-
Replaced foot
-
Tag added by Honeywell - indicates the later usage of this mainframe
