013-0055-00: Difference between revisions

From TekWiki
Jump to navigation Jump to search
mNo edit summary
No edit summary
(3 intermediate revisions by 3 users not shown)
Line 1: Line 1:
Plug-In Extension (013-0055-00- For use while calibrating any Tektronix 530, 540, 550, and 580 Series Oscilloscopes as well as the plug-ins that go with those scopes.
The '''Tektronix 013-0055-00 Plug-In Extension''' is used for calibrating and repairing
Tektronix [[500-series scopes|530, 540, 550]], and [[585|580]] series oscilloscopes as well as their plug-ins.
   
   
This particular extender is optimized for the 580 series, which has it's pin-out flipped 180° over earlier 5xx series.  Pins 8,9,11,14,16 are connected via 93Ω coax; these pins are signal and trigger lines on the 580 series, but are mostly to power pins on the earlier series.  
The 013-0055-00 extender is optimized for [[580-series scopes]], which has the plug-in pin-out flipped 180° over earlier 5xx series.   
 
Pins 8,9,11,14,16 are connected via 93 Ω coax; these pins are signal and trigger lines on the 580 series,  
but are mostly power pins on the earlier series.  
 
* [[Media:061-888.pdf|013-055 Datasheet (PDF, needs OCR)]]


<gallery>
<gallery>
File:013_0055_0.jpg
013_0055_0.jpg
File:013_0055_1.jpg
013_0055_1.jpg
File:013_0055_2.jpg
013_0055_2.jpg
</gallery>
</gallery>




[[Category:Calibration fixtures]]
[[Category:Calibration fixtures]]

Revision as of 02:02, 22 December 2019

The Tektronix 013-0055-00 Plug-In Extension is used for calibrating and repairing Tektronix 530, 540, 550, and 580 series oscilloscopes as well as their plug-ins.

The 013-0055-00 extender is optimized for 580-series scopes, which has the plug-in pin-out flipped 180° over earlier 5xx series.

Pins 8,9,11,14,16 are connected via 93 Ω coax; these pins are signal and trigger lines on the 580 series, but are mostly power pins on the earlier series.