013-0055-00: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
Plug-In Extension (013-0055-00) - For use while calibrating any Tektronix 530, 540, 550, and 580 Series Oscilloscopes as well as the plug-ins that go with those scopes. This particular extender is optimized for the 580 series, which has it's pin-out flipped 180° over earlier 5xx series. Pins 8,9,11,14,16 are connected via 93Ω coax; these pins are signal and trigger lines on the 580 series, but are mostly to power pins on the earlier series. | Plug-In Extension (013-0055-00) - For use while calibrating any Tektronix 530, 540, 550, and 580 Series Oscilloscopes as well as the plug-ins that go with those scopes. | ||
This particular extender is optimized for the 580 series, which has it's pin-out flipped 180° over earlier 5xx series. Pins 8,9,11,14,16 are connected via 93Ω coax; these pins are signal and trigger lines on the 580 series, but are mostly to power pins on the earlier series. | |||
<gallery> | <gallery> | ||
Revision as of 18:19, 19 October 2015
Plug-In Extension (013-0055-00) - For use while calibrating any Tektronix 530, 540, 550, and 580 Series Oscilloscopes as well as the plug-ins that go with those scopes. This particular extender is optimized for the 580 series, which has it's pin-out flipped 180° over earlier 5xx series. Pins 8,9,11,14,16 are connected via 93Ω coax; these pins are signal and trigger lines on the 580 series, but are mostly to power pins on the earlier series.
