067-0625-00: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
(6 intermediate revisions by 2 users not shown)
Line 1: Line 1:
The Tektronix 067-0625-00 is a Peak to Peak detector designed for signals in the 50Hz to 500MHz range.
{{Instrument Sidebar
The input amplitude should be 1.2Vpp.
|manufacturer=Tektronix
The input is a [[GR-874 connector]] terminated in 50 ohms.
|class=Accessory
|model=067-0625-00
|summary=Peak-to-peak detector
|image=Tek 0625 1.JPG
|caption=Tektronix 067-0625-00
|introduced=(?)
|discontinued=(?)
|manuals=
* [[Media:062-1306-00.pdf|Tektronix 067-0625-00 Manual -00]] (PDF)
* [[Media:062-1306-01.pdf|Tektronix 067-0625-00 Manual -01]] (PDF)
* [[Media:Tek 067-0625-00 service cal procedure.pdf|Tektronix 067-0625 Service Calibration Procedure (PDF, needs OCR)]]
}}
The '''Tektronix 067-0625-00''' is a peak-to-peak detector designed to measure the output voltage flatness
of constant amplitude signal generators in the 50 Hz to 500 MHz range.
The input amplitude should be 1.2 V<sub>p-p</sub>.
 
The input is a [[GR-874 connector]] terminated in 50 Ω.
 
There are two outputs, one for the positive peak voltage and one for the negative peak voltage.
There are two outputs, one for the positive peak voltage and one for the negative peak voltage.
The outputs are [[Connectors#BNC|BNC]] females, intended for connection to high-impedance low-frequency
The outputs are [[BNC]] females, intended for connection to high-impedance low-frequency
instrumentation.
instrumentation.


Up to serial number B003240, the 067-0625-00 used 1.35V mercury batteries for biasing the detector diodes.
Up to serial number B003240, the 067-0625-00 used 1.35 V mercury batteries for biasing the detector diodes.
Starting at serial number B003241, 1.5V alkaline batteries were used.
Starting at serial number B003241, 1.5 V alkaline batteries were used.


{{BeginSpecs}}
{{Spec | Sensitivity | 10 ±1 mV/% input change at 1.2 V<sub>p-p</sub> }}
{{Spec | Temperature Range | 23&deg;C ±10&deg;C }}
{{Spec | Output | Into floating 2 MΩ load or differential oscilloscope with 1 MΩ inputs }}
{{EndSpecs}}


* [http://w140.com/tek_067-0625-00.pdf Tektronix 067-0625-00 Manual (PDF)]
==Links==
* [https://www.youtube.com/watch?v=VVPHifwseJc Building a 067-0625-00 clone] by NFM @ YouTube


==Pictures==
<gallery>
<gallery>
File:Tek 0625 1.JPG
Tek 0625 1.JPG
File:Tek 0625 2.JPG
Tek 0625 2.JPG
File:Tek 067-0625-00 schem.png
Tek 067-0625-00 schem.png
</gallery>
</gallery>




[[Category:Accessories]]
[[Category:Test adapters]]

Revision as of 14:57, 7 September 2021

Tektronix 067-0625-00
Peak-to-peak detector
Tektronix 067-0625-00

Produced from (?) to (?)

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix 067-0625-00 is a peak-to-peak detector designed to measure the output voltage flatness of constant amplitude signal generators in the 50 Hz to 500 MHz range. The input amplitude should be 1.2 Vp-p.

The input is a GR-874 connector terminated in 50 Ω.

There are two outputs, one for the positive peak voltage and one for the negative peak voltage. The outputs are BNC females, intended for connection to high-impedance low-frequency instrumentation.

Up to serial number B003240, the 067-0625-00 used 1.35 V mercury batteries for biasing the detector diodes. Starting at serial number B003241, 1.5 V alkaline batteries were used.

Key Specifications

Sensitivity 10 ±1 mV/% input change at 1.2 Vp-p
Temperature Range 23°C ±10°C
Output Into floating 2 MΩ load or differential oscilloscope with 1 MΩ inputs

Links

Pictures