067-0625-00: Difference between revisions

← Older edit

067-0625-00 (view source)

Revision as of 05:30, 11 March 2024

1,396 bytes added , 11 March

no edit summary

Kurt

Bureaucrats, Interface administrators, Suppressors, Administrators

32,016

edits

@@ Line 1: / Line 1: @@
-Tektronix 067-0625-00 Peak to Peak Detector
+{{Instrument Sidebar
+|manufacturer=Tektronix
+|class=Accessory
+|model=067-0625-00
+|summary=Peak-to-Peak Detector
+|image=Tek 0625 1.JPG
+|caption=Tektronix 067-0625-00
+|introduced=(?)
+|discontinued=(?)
+|manuals=
+* [[Media:062-1306-00.pdf|Tektronix 067-0625-00 Manual -00]] (PDF)
+* [[Media:062-1306-01.pdf|Tektronix 067-0625-00 Manual -01]] (PDF)
+* [[Media:Tek 067-0625-00 service cal procedure.pdf|Tektronix 067-0625 Service Calibration Procedure (OCR)]]
+}}
+The '''Tektronix 067-0625-00''' is a peak-to-peak detector designed to measure the output voltage flatness
+of constant amplitude signal generators in the 50 Hz to 500 MHz range.
+The input amplitude should be 1.2 V<sub>p-p</sub>.
-* [http://w140.com/tek_067-0625-00.pdf Tektronix 067-0625-00 Manual (PDF)]
+The input is a [[GR-874 connector]] terminated in 50 Ω.
+There are two outputs, one for the positive peak voltage and one for the negative peak voltage.
+The outputs are [[BNC]] females, intended for connection to high-impedance low-frequency
+instrumentation.
+Up to serial number B003240, the 067-0625-00 used 1.35 V mercury batteries for biasing the detector diodes.
+Starting at serial number B003241, 1.5 V alkaline batteries were used.
+{{BeginSpecs}}
+{{Spec | Sensitivity | 10 ±1 mV/% input change at 1.2 V<sub>p-p</sub> }}
+{{Spec | Temperature Range | 23&deg;C ±10&deg;C }}
+{{Spec | Output | Into floating 2 MΩ load or differential oscilloscope with 1 MΩ inputs }}
+{{EndSpecs}}
+==Links==
+* [https://www.youtube.com/watch?v=VVPHifwseJc Building a 067-0625-00 clone] by NFM @ YouTube
+==Pictures==
 <gallery>
-File:Tek 0625 1.JPG
+Tek 0625 1.JPG
-File:Tek 0625 2.JPG
+Tek 0625 2.JPG
-File:Tek 067-0625-00 schem.png
+Tek 067-0625-00 schem.png
 </gallery>
+[[Category:Test adapters]]