Difference between revisions of "067-0625-00"

From TekWiki
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 +
{{Instrument Sidebar
 +
|manufacturer=Tektronix
 +
|class=Accessory
 +
|model=067-0625-00
 +
|summary=Peak-to-peak detector
 +
|image=Tek 0625 1.JPG
 +
|caption=Tektronix 067-0625-00
 +
|introduced=(?)
 +
|discontinued=(?)
 +
|manuals=
 +
* [[Media:062-1306-00.pdf|Tektronix 067-0625-00 Manual -00]] (PDF)
 +
* [[Media:062-1306-01.pdf|Tektronix 067-0625-00 Manual -01]] (PDF)
 +
* [[Media:Tek 067-0625-00 service cal procedure.pdf|Tektronix 067-0625 Service Calibration Procedure (PDF, needs OCR)]]
 +
}}
 
The '''Tektronix 067-0625-00''' is a peak-to-peak detector designed to measure the output voltage flatness  
 
The '''Tektronix 067-0625-00''' is a peak-to-peak detector designed to measure the output voltage flatness  
 
of constant amplitude signal generators in the 50 Hz to 500 MHz range.
 
of constant amplitude signal generators in the 50 Hz to 500 MHz range.
Line 18: Line 32:
 
{{EndSpecs}}
 
{{EndSpecs}}
  
==Manuals==
+
==Links==
* [http://w140.com/tek_067-0625-00.pdf Tektronix 067-0625-00 Manual (PDF)]
+
* [https://www.youtube.com/watch?v=VVPHifwseJc Building a 067-0625-00 clone] by NFM @ YouTube
* [[Media:062-1306-00.pdf]]
 
* [[Media:Tek 067-0625-00 service cal procedure.pdf|Tektronix 067-0625 Service Calibration Procedure (PDF, needs OCR)]]
 
  
 
==Pictures==
 
==Pictures==

Latest revision as of 14:57, 7 September 2021

Tektronix 067-0625-00
Peak-to-peak detector
Tektronix 067-0625-00

Produced from (?) to (?)

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix 067-0625-00 is a peak-to-peak detector designed to measure the output voltage flatness of constant amplitude signal generators in the 50 Hz to 500 MHz range. The input amplitude should be 1.2 Vp-p.

The input is a GR-874 connector terminated in 50 Ω.

There are two outputs, one for the positive peak voltage and one for the negative peak voltage. The outputs are BNC females, intended for connection to high-impedance low-frequency instrumentation.

Up to serial number B003240, the 067-0625-00 used 1.35 V mercury batteries for biasing the detector diodes. Starting at serial number B003241, 1.5 V alkaline batteries were used.

Specifications

Sensitivity 10 ±1 mV/% input change at 1.2 Vp-p
Temperature Range 23°C ±10°C
Output Into floating 2 MΩ load or differential oscilloscope with 1 MΩ inputs

Links

Pictures