11A-series plug-in NVRAM replacement: Difference between revisions

11A-series plug-in NVRAM replacement (view source)

19 bytes added , 13 February 2019

transitory commit, not complete

31,996

edits

@@ Line 264: / Line 264: @@
 ==DEFLECTION FACTORS AND ASSOCIATED ADDRESS TABLE==
-Deflection Factor
+{| class=wikitable
-mV/div 20mV/div 10mV/div
+|Deflection Factor
-mV/div 2mV/div 1mV/div
+|CH1 Cal Address
+|CH2 Cal Address
+|-
+|50mV/div
+|58
+|186
+|-
+|20mV/div
+|57
+|185
+|-
+|10mV/div
+|56
+|184
+|-
+|5mV/div
+|55
+|183
+|-
+|2mV/div
+|54
+|182
+|-
+|1mV/div
+|53
+|181
+|}
 That should do it.
-CH1 Cal Address
+Return the plug-in J611 jumper to the vertical position.
+Return the mainframe Cal Lock jumper to the disconnected state.
-CH2 Cal Address
-   Return the plugin disconnected state.
-J611 jumper to the
-vertical position. Return the mainframe Cal Lock jumper to the
 With 12 new HFAdj cal constants and a new serial number, the instrument will probably come up without errors.
 If there are probe related errors,
@@ Line 291: / Line 305: @@
 on the front panel with the instrument running and then removing it.
 Simply recycling the power or shorting the probe ring may also do this.
-You can check that the serial number is correct by pressing the mainframe front panel “UTILITY” button and touching the “Ident” part of the screen.
+You can check that the serial number is correct by pressing
+the mainframe front panel “UTILITY” button and touching the “Ident” part of the screen.
 All the installed plugin serial numbers and firmware versions should be shown.