11A81: Difference between revisions

From TekWiki
Jump to navigation Jump to search
(cat)
No edit summary
(14 intermediate revisions by 3 users not shown)
Line 1: Line 1:
The '''Tektronix 11A81''' is a 3 GHz plug-in for [[11000-series scopes]], primarily the [[11403]]A.
{{Plugin Sidebar
|manufacturer=Tektronix
|series=11000-series scopes
|type=11A81
|summary=3 GHz vertical amplifier plug-in
|image=Tek 11a81.jpg
|caption=Tektronix 11A81
|introduced=(?)
|discontinued=(?)
|designers=Murlan Kaufman
|manuals=
* [[Media:070-8148-00.pdf|Tektronix 11A81 Service Reference (PDF, OCR)]]
* [[Media:Tektronix 11k plugin NVRAM replacement.pdf|Tektronix 11k Plug-in NVRAM Replacement (PDF)]]
}}
The '''Tektronix 11A81''' is a 3 GHz single-channel sampler/amplifier plug-in for the [[11403A]] and the [[CSA404]].
The 11A81 receives an "acquisition strobe" signal from the mainframe, and samples the input signal.
The sampled signal is fed to the mainframe, where it is digitized and displayed.
This architecture allows the 11A81 to provide higher bandwidth than the 11k plug-in to mainframe signal path.


Development of the 11A81 was managed by [[Murlan Kaufman]].
A [[165-2448-00]] (U950) diode bridge IC is used for over-voltage protection.
A [[165-2392-00]] (U650) H2392 sampling bridge performs the sampling.
{{BeginSpecs}}
{{Spec | Bandwidth | DC to 3 GHz  (in [[11403A]]/[[CSA404]] only) }}
{{Spec | Rise time | < 130 ps}}
{{Spec | Deflection | 10 mV/div to 1 V/div }}
{{Spec | Input impedance | 50 Ω }}
{{EndSpecs}}
==Pictures==
<gallery>
<gallery>
Image:Tek 11a81.jpg
Tek 11a81.jpg
Tek 11a81 block diagram.png|block diagram
Tek 11403a with 11a71 11a81 11a72 1.jpg|11A81 in [[11403A|11403]]
Tek 11403a with 11a71 11a81 11a72 2.jpg|11A81 in [[11403A|11403]]
Tek 11a81 right.jpg
Tek 11a81 left.jpg
</gallery>
</gallery>


[[Category:Specifications needed]]
[[Category:11000 series plugins]]
[[Category:11000 series plugins]]
[[Category:Tekprobe BNC]]

Revision as of 23:57, 20 July 2022

Tektronix 11A81
3 GHz vertical amplifier plug-in
Tektronix 11A81

Compatible with 11000-series scopes

Produced from (?) to (?)

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix 11A81 is a 3 GHz single-channel sampler/amplifier plug-in for the 11403A and the CSA404. The 11A81 receives an "acquisition strobe" signal from the mainframe, and samples the input signal. The sampled signal is fed to the mainframe, where it is digitized and displayed. This architecture allows the 11A81 to provide higher bandwidth than the 11k plug-in to mainframe signal path.

Development of the 11A81 was managed by Murlan Kaufman.

A 165-2448-00 (U950) diode bridge IC is used for over-voltage protection. A 165-2392-00 (U650) H2392 sampling bridge performs the sampling.

Key Specifications

Bandwidth DC to 3 GHz (in 11403A/CSA404 only)
Rise time < 130 ps
Deflection 10 mV/div to 1 V/div
Input impedance 50 Ω

Pictures