155-0010-00: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
The '''155-0010-00''' is a Tek-made Chop Divider and Blanking chip in a TO-99 can.
The '''Tektronix 155-0010-00''' (M004) is a Tek-made chop divider and blanking chip in a TO-99 can, designed by [[Les Larson]].
 
The chop divider receives a clock signal from the chop decoder and
blanking circuit and counts it down by two for the vertical switch,
and by four for the plug-in chop. It also provides a horizontal chop
blanking pulse if the horizontal mode switch is CHOP


==Used in==
==Used in==
* [[7504]], [[7514]]
* [[7704]], [[7704A]]
* [[7704]], [[7704A]]
* [[7834]]
* [[7834]]
Line 11: Line 17:
[[Media:Tek 155-0010-00.pdf|Tektronix 155-0010-00 Datasheet (PDF)]]
[[Media:Tek 155-0010-00.pdf|Tektronix 155-0010-00 Datasheet (PDF)]]


[[Category:Tektronix-made integrated circuits]]
[[Category:Tektronix-made monolithic integrated circuits]]

Revision as of 01:35, 26 July 2018

The Tektronix 155-0010-00 (M004) is a Tek-made chop divider and blanking chip in a TO-99 can, designed by Les Larson.

The chop divider receives a clock signal from the chop decoder and blanking circuit and counts it down by two for the vertical switch, and by four for the plug-in chop. It also provides a horizontal chop blanking pulse if the horizontal mode switch is CHOP

Used in

Datasheet

Tektronix 155-0010-00 Datasheet (PDF)