1,537
edits
m (Corrected 12B4 valve type (not duotriode) to match schematic for 160A -170V supply.) |
m (→Pictures) |
||
(30 intermediate revisions by 4 users not shown) | |||
Line 1: | Line 1: | ||
The Tektronix 160 series is a modular | {{Oscilloscope Sidebar | ||
(schematics drawn in [[introduced in 1953|1953]]) to the late | |manufacturer=Tektronix | ||
A 160 series system typically includes a Type 160 power supply, a [[360|Type 360 indicator unit]], and one or more of the [[161]], [[162]], and [[163]] trigger and sweep modules. | |model=160 | ||
Power connections are made behind the modules using cables that have | |series=160 | ||
[[ | |summary=Modular Oscilloscope | ||
The power cables can be connected in a star topology (Type 160 in the center) | |image=Tek_160a_360_161_162_trace.jpg | ||
or can be daisy-chained using the loop-through connection on the back of each module. | |caption=160A 360 161 162 | ||
|introduced=1952 | |||
|discontinued=(?) | |||
|designers= | |||
|manuals= | |||
* [[Media:070-220.pdf|Tektronix 160-series Manual]] (PDF) | |||
* [https://w140.com/tek_360_160_irb.pdf Tektronix 160-series Instrument Reference Book (PDF, OCR, 210MB!)] | |||
* [[Media:Tek 160a fcp.pdf|Tektronix 160a Factory Calibration Procedure (PDF, OCR)]] | |||
}} | |||
The '''Tektronix 160 series''' is a modular instrument made from the mid-1950s (schematics drawn in [[introduced in 1953|1953]]) to the late 1960s (in 1969 catalog). The catalog describes them as instruments designed to generate timed pulses of variable amplitude and width for use in nerve stimulation/neurophysical experiments. | |||
A 160 series system typically includes a Type 160 power supply, a [[360|Type 360 indicator unit]], and one or more of the [[161]], [[162]], and [[163]] trigger and sweep modules. | |||
There is also a single-unit power supply, the [[126]]. | |||
Each module is the size of a small shoe box. Power connections are made behind the modules using [[W160|Type W160]] cables that have [[octal connector]]s. | |||
The power cables can be connected in a star topology (Type 160 in the center) or can be daisy-chained using the loop-through connection on the back of each module. | |||
Signal connections are made on the front, typically with banana plugs. | Signal connections are made on the front, typically with banana plugs. | ||
The 160, 161, 162, and 163 use the ceramic strip and silver solder construction style | |||
In a typical setup, the input signal is fed through a splitter to the Y-input of the 360 and the trigger input of the 161. | |||
The 161 generates a trigger pulse that controls a 162, which generates the horizontal ramp for the sweep. | |||
This ramp signal is sent to the 360 horizontal input. | |||
The signals on the front panel of the 160-series modules are all single-ended. | |||
According to the May 1952 issue of Tek Talk (page 6), the 160 Series entered limited production in April of 1952. | |||
* [[Media:Tek_160-1953_Catalog.pdf |160 Description from 1953 catalog (PDF)]] | |||
{{BeginSpecs}} | |||
{{SpecGroup|Type 160 Power Supply}} | |||
{{Spec | +300 V output | DC, unregulated, 170 mA max}} | |||
{{Spec | +225 V output | DC, regulated, 125 mA max }} | |||
{{Spec | +150 V output | DC, regulated, 5 mA max }} | |||
{{Spec | −170 V output | DC, regulated, 125 mA max}} | |||
{{Spec | 6.3 V output | AC, unregulated, 10 A max }} | |||
{{SpecGroup|Type 160A Power Supply}} | |||
{{Spec | +300 V output | DC, unregulated, 250 mA max}} | |||
{{Spec | +225 V output | DC, regulated, 175 mA max }} | |||
{{Spec | +150 V output | DC, regulated, 15 mA max }} | |||
{{Spec | +70 V output | DC, unregulated ''max load?''}} | |||
{{Spec | −170 V output | DC, regulated, 125 mA max}} | |||
{{Spec | 6.3 V output | AC, unregulated, 20 A max }} | |||
{{EndSpecs}} | |||
==Internals== | |||
The 160, 161, 162, and 163 use the ceramic strip and silver solder construction style that | |||
is prevalent in other Tektronix equipment of the era, such as the 500-series scopes like the [[545]]. | |||
The Type 360 indicator unit contains the CRT HV power supply and the vertical amplifier | The Type 360 indicator unit contains the CRT HV power supply and the vertical amplifier | ||
and is constructed using a single-sided printed circuit board. | and is constructed using a single-sided printed circuit board. | ||
The 360 has a phase splitter to generate the differential drive for the horizontal deflection plates. | The 360 has a phase splitter to generate the differential drive for the horizontal deflection plates. | ||
The 360 uses a standard [[3WP|3WP series 3-inch CRT]]. | The 360 uses a standard [[3WP|3WP series 3-inch CRT]]. | ||
The cathode voltage is | The cathode voltage is −1850 V. No post-deflection acceleration is used. | ||
The 160 power supply was produced with serial numbers 101-619. | The 160 power supply was produced with serial numbers 101-619. | ||
For serial numbers 620 and up, it is slightly different and is called the 160A. | For serial numbers 620 and up, it is slightly different and is called the 160A. | ||
The 160 and 160A both use a [[5V4]] rectifier tube for the negative voltage | The 160 and 160A both use a [[5V4]] rectifier tube for the negative voltage | ||
and two 5V4 tubes in parallel for the positive voltage. | and two 5V4 tubes in parallel for the positive voltage. | ||
Both use [[5651]] 87-volt reference tubes. | Both use [[5651]] 87-volt reference tubes. | ||
The 160 and 160A differ in their output regulator circuits. | The 160 and 160A differ in their output regulator circuits. | ||
The 160 uses a [[6AS7]] dual-triode tube, one half to regulate the + | The 160 uses a [[6AS7]] dual-triode tube, one half to regulate the +225 V output | ||
and the other half to regulate the | and the other half to regulate the −170 V output. The 160A uses both halves of a | ||
[[6080]] dual-triode in parallel to regulate the + | [[6080]] dual-triode in parallel to regulate the +225 V output, | ||
and two parallel [[12B4]] triodes to regulate the | and two parallel [[12B4]] triodes to regulate the −170 V output. | ||
==Links== | |||
*[https://vintagetek.org/160-series-instruments/ 160@Vintage Tek] | |||
==Pictures == | |||
<gallery> | <gallery> | ||
Tek 160 dn1.jpg|photo courtesy of Dave Nicol | |||
Tek 160 dn2.jpg|photo courtesy of Dave Nicol | |||
Tek 160 schem.png|160 schematic | |||
Tek 160a schem.png|160A schematic | |||
Tek 160a 360 161 162 trace.jpg|160 system in operation. | |||
Rack of 160-series modules.jpg | |||
Tek 160 system 1.jpg | |||
Tek 160 system 2.jpg | |||
Tek 160 system 3.jpg | |||
Tek 160 system 4.jpg | |||
Tek 160 system 5.jpg | |||
Tek 160 system 6.jpg | |||
Tek 160 system 7.jpg | |||
Tek_160A_Front.jpeg | 160A Power supply, front | |||
Tek_160A_Front1.jpeg | 160A Power supply | |||
Tek_160A_Back1.jpeg | 160A Power supply | |||
Tek_160A-Rear.png| 160A Power supply, rear | |||
Tek_160A-RHS.jpeg | 160A Power supply, RHS | |||
Tek_160A_Underside.jpeg | 160A Power supply, underside | |||
</gallery> | </gallery> | ||
[[Category:160 system]] |
edits