1705: Difference between revisions

1705 (view source)

5 bytes removed , 10 July 2019

no edit summary

1,192

edits

@@ Line 17: / Line 17: @@
 The CRT has a graticule that can be lit up or not depending on the internal jumper position.  With non-volatile memory (NVRAM) you can save the current front-panel switch settings, at power down, so that the 1705A can come back with the last front-panel setup.  The user interface has on-screen frequency readout, as well as, setup menus.  The L-Band readout may be reconfigured to display a satellite frequency in the range of 0.9 GHz to 20 GHz.
-Rear panel inputs/outputs are: L-BAND INPUT [[F-Type connector]] (Female connector used for the 900 – 2000 MHz input of the L-Band rf, which is down converted by a Low-Noise Amplifier/Block Down Converted (LNB) from the received satellite signal; The LNB POWER switch enables or disables an 18 V supply for the Block Down Converted through the L-BAND INPUT connector); 70 MHz INPUT [[BNC connector]] (Female connector used for the input of the 45MHz – 100 MHz rf).
+Rear panel inputs/outputs are: L-BAND INPUT [[F connector]] (Female connector used for the 900 – 2000 MHz input of the L-Band rf, which is down converted by a Low-Noise Amplifier/Block Down Converted (LNB) from the received satellite signal; The LNB POWER switch enables or disables an 18 V supply for the Block Down Converted through the L-BAND INPUT connector); 70 MHz INPUT [[BNC connector]] (Female connector used for the input of the 45MHz – 100 MHz rf).
 ---------------------------------------------------------