183: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
The Tektronix 183 is part of the rotational analyzer system.
[[File:Tek 183a front.JPG | thumb | 300px | right | Tektronix 183A]]
 
The '''Tektronix 183''' is a rotational analyzer for use with the [[182|182 angle-encoding transducer]].
The 183B appears in the 1961 catalog.
The 183B appears in the 1961 catalog.
The Tektronix 182A and 183A were furnished as a set, since the calibration of the 182A was part
of the 183A. This was changed in the 182B and 183B series, so the 182B rotational transducer
and the 183B rotational analyzer were completely interchangeable. Consequently, "A" series and
"B" series models may not be mixed.
The cable between the 182 and 183 uses [[Amphenol 165 series connectors]].  The 183's outputs are via [[UHF connector]]s.
The 183's predecessor might be the [[32TU]].
==Manuals==


* [http://w140.com/tek_rotan_system_in_1961_catalog.pdf Tektronix Rotan System 182B/183B in 1961 Catalog (PDF)]
* [http://w140.com/tek_rotan_system_in_1961_catalog.pdf Tektronix Rotan System 182B/183B in 1961 Catalog (PDF)]
* [[media:070-320.pdf | 182B/183B Photo-Rotational Analyzer Manual (PDF)]]
{{MissingSpecs}}
==Pictures==


<gallery>
<gallery>
Image:Tek 183a front.JPG
Tek 183a front.JPG
Image:Tek 183a left.JPG
Tek 183a left.JPG
Image:Tek 183a right.JPG
Tek 183a right.JPG
Image:Tek 183a panel rear.JPG
Tek 183a panel rear.JPG
Image:Tek rotan 62 cat.jpg
Tek rotan 62 cat.jpg
</gallery>
</gallery>


Line 15: Line 33:




[[Category:Specifications needed]]
[[Category:Introduced in 1961]]
[[Category:Manual needed]]
[[Category:Manual needed]]
[[Category:Accessories]]

Revision as of 07:15, 26 July 2019

Tektronix 183A

The Tektronix 183 is a rotational analyzer for use with the 182 angle-encoding transducer. The 183B appears in the 1961 catalog.

The Tektronix 182A and 183A were furnished as a set, since the calibration of the 182A was part of the 183A. This was changed in the 182B and 183B series, so the 182B rotational transducer and the 183B rotational analyzer were completely interchangeable. Consequently, "A" series and "B" series models may not be mixed.

The cable between the 182 and 183 uses Amphenol 165 series connectors. The 183's outputs are via UHF connectors.

The 183's predecessor might be the 32TU.

Manuals

Key Specifications

  • please add

Pictures