1A5: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 12: Line 12:
* [[Media:Tek type 1a5 fcp no ocr.pdf|Tektronix Type 1A5 Factory Calibration Procedure, March 1969 (PDF, needs OCR)]]
* [[Media:Tek type 1a5 fcp no ocr.pdf|Tektronix Type 1A5 Factory Calibration Procedure, March 1969 (PDF, needs OCR)]]
* [[Media:Tek 1a5 fcp sep 1967.pdf‎|Tektronix 1A5 Factory Calibration Procedure, September 1967]]
* [[Media:Tek 1a5 fcp sep 1967.pdf‎|Tektronix 1A5 Factory Calibration Procedure, September 1967]]
* [[Media:Tek 1a5 cal outline.pdf|Tektronix 1A5 Calibration Outline (PDF, OCR)]]
}}
}}
The '''Tektronix Type 1A5''' is a differential amplifier plug-in for [[500-series scopes]].   
The '''Tektronix Type 1A5''' is a differential amplifier plug-in for [[500-series scopes]].   

Revision as of 17:40, 3 May 2021

Template:Plugin Sidebar 2 The Tektronix Type 1A5 is a differential amplifier plug-in for 500-series scopes.

It has an Amphenol 165 series connector on the front panel for direct connection of the Type P6046 Active Differential Probe.

Type 1A5 was introduced in 1967, replacing Types W and Z, and lasted until the end of the 500-series scope line.

Key Specifications

Bandwidth 50 MHz down to 5 mV/div, 40 MHz at 1 mV/div
Deflection 1 mV/div to 20 V/div, 1−2−5
Common-mode rejection 20,000:1 DC to 100kHz, 10,000:1 up to 1MHz, 200:1 at 20 MHz

Like most Tektronix differential plug-ins, the 1A5 has three modes: VA−VC, VA−VB, and VC−VB.

VC is controlled by a ten-turn potentiometer and can vary from −5 V to +5 V (0.5 V on the 5 V/div to 20 V/div ranges).

Pictures